I finally got it to work! Thanks Slugnet! Full details and human-friendly blogpost here - http://tinyurl.com/5jjc4b
Geek details below - (1) Use USB ModeSwitch. Get it from - http://www.draisberghof.de/usb_modeswitch/ Binary (x86) - http://www.kquee.com/vault/usb_modeswitch.tar.gz $ ./usb_modeswitch -v 0×12d1 -p 0×1001 -H 1 * usb_modeswitch: tool for controlling “flip flop” mode USB devices * Version 0.9.4 (C) Josua Dietze 2008 * Works with libusb 0.1.12 and probably other versions Looking for default devices Found default devices (1) Prepare switching, accessing latest device OK, Huawei control message successfully sent. -> See /proc/bus/usb/devices (or call lsusb) for changes. Bye (2) wvdial - Configuration File - [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,”IP”,”internet” Stupid Mode = 1 ISDN = 0 Modem Type = Analog Modem Phone = *99# Modem = /dev/ttyUSB0 Username = NA Dial Command = ATDT Password = pass Baud = NA (3) Tada! -- Kelvin Quee +65 9177 3635 [EMAIL PROTECTED] _______________________________________________ Slugnet mailing list [email protected] http://wiki.lugs.org.sg/LugsMailingListFaq http://www.lugs.org.sg/mailman/listinfo/slugnet
