We are trying very hard and hope to give you guys the PPPoE
functionality very soon. Even though the function sounds simple, there
are some interesting technical challenges to make this happen. 

We have the PPPoE running in the lab. We have verified with the
MikroTik. And I believe 2-3 guys in the field have tried it out also.
With the bad experience of last time, we are a bit careful in testing it
more thoroughly prior to release. 

Please send an email to Alex ([EMAIL PROTECTED]) if you can help
test it out. 

Thanks.

Nish


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, June 01, 2003 6:12 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] Bandwidth Shaping - Wish List

No all those inexpensive bridges simply reform the MAC source address to
their own (much like the airbridge works).

I think the key behind keeping airbridge functionality different from
client bridge is to have a higher end product which is capable of more
and thus more $$$.

Of course who knows, with this new firmware they may just end up putting
multi-mac capability on the airbridge to enable PPPoE to work.

Cheers,
Paul

-----
Paul C. Murdock [EMAIL PROTECTED]
mobile/801.864.1024 - fax/801.446.0130
www.paulmurdock.com - for more info

>-----Original Message-----
>From: [EMAIL PROTECTED] 
>[mailto:[EMAIL PROTECTED] On Behalf Of Pascal Losier
>Sent: Saturday, May 31, 2003 4:02 PM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] Bandwidth Shaping - Wish List
>
>
>Does Hawking,Wet11,D-link or Superpass bridge more perform 
>like a full bridge ??
>
>
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED] 
>[mailto:[EMAIL PROTECTED] On Behalf Of Eje Gustafsson
>Sent: Friday, May 30, 2003 12:18 AM
>To: Laurence Laforga
>Subject: Re: [smartBridges] Bandwidth Shaping - Wish List
>
>
>I'd like to see a aB that have a real bridge function in it. 
>If they can manage to make the aP's client bridge work 
>correctly why can't they make the the aB firmware bridge 
>correctly ? The old firmware did bridge correctly but limited 
>to 1 mac only.
>
>Sucks to have to run the old firmware to get a real bridge 
>(and lose remote management) or to pay the extra money and use 
>a aP in client bridge mode.
>
>Consider all the lame responses I heard from sB I understand 
>that they have no interest in fixing this problem. Why would 
>they want to they get more money out of me since I am forced 
>to purchase a aP and use it in client bridge mode that works 
>correctly while maintaining the ability to do remote 
>management of the unit..
>
>Best regards,
> Eje Gustafsson                       mailto:[EMAIL PROTECTED]
>The Family Entertainment Network      http://www.fament.com
>Phone : 620-231-7777                  Fax   : 620-231-4066
>     - Your Full Time Professionals -
>eBay UserID : macahan
>--- 
>searchable smartBridges mailing list archive. 
>http://www.mail-archive.com/smartbridges40part-15.org/
>--
>LL> The thread mentions that the APPOs will be upgradable to handle 
>LL> bandwidth management.....
>
>>> This message is in MIME format. Since your mail reader does not
>LL> understand
>>> this format, some or all of this message may not be legible.
>>> 
>>> 
>>> Personally I'm going to wait and get the nexuses in 2 months or so I
>LL> can
>>> survive for that lil bit of time without any more bwmgmt than I have
>LL> now
>>> (crappy e-bwmgr) and then when the simpletraps come out ill buy all
>LL> new ap's
>>> and use my current ap's as client bridges.
>>> 
>>>  
>>> 
>>> Chris
>>> 
>>>  
>>> 
>>>   _____
>>> 
>>> From: Laurence Laforga [mailto:[EMAIL PROTECTED]
>>> Sent: Thursday, May 29, 2003 6:27 AM
>>> To: [EMAIL PROTECTED]
>>> 
>>>  
>>> 
>>> Just wondering where we are with this issue? I've been wrestling
>LL> with some
>>> options, in particular purchasing Brilan to do the bandwidth
>>> management....but if the APPs will be able to do it then I'd rather
>LL> spend
>>> the extra cash on purchasing another APPO.
>>> 
>>>  
>>> 
>>> Laurence
>>> 
>>>  
>>> 
>>> -----Original Message-----
>>> From: [EMAIL PROTECTED] 
>[mailto:[EMAIL PROTECTED]
>LL> 15.org]
>>> On Behalf Of Nish Park
>>> Sent: Thursday, April 10, 2003 6:37 PM
>>> To: [EMAIL PROTECTED]
>>> Subject: [smartBridges] Bandwidth Shaping - Wish List
>>> 
>>>  
>>> 
>>>  
>>> 
>>> Hi Guys,
>>> 
>>>  
>>> 
>>> As mentioned a few times on this list, we are currently developing
>LL> the
>>> Bandwidth Management function for our airPoint Pro products. We have
>LL> a base
>>> set of functionality defined and I would like to get some input from
>LL> the
>>> user community on the Wish List. Can we have a brainstroming thread
>LL> to flush
>>> out the ideas.
>>> 
>>>  
>>> 
>>> Please post your wish list of what you would like to see for
>LL> Bandwidth
>>> Shaping in the airPoint Pro. Thanks.
>>> 
>>>  
>>> 
>>> Nish
>>> 
>>>  
>>> 
>>> 
>>> 
>
>LL> Laurence Laforga
>LL> President
>LL> TIRGON Communications
>LL> The PART-15.ORG smartBridges Discussion List
>LL> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>LL> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] 
>LL> (in the body type unsubscribe smartBridges)
>LL> Archives: http://198.63.203.6  
>LL> ---
>LL> [This E-mail scanned for viruses by Declude Virus]
>
>---
>[This E-mail scanned for viruses by Declude Virus]
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type 
>subscribe smartBridges <yournickname> To Remove: 
mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  




The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to