Ivan, I tried to send the following message to you off-line, but your e-mail program rejected it as spam! Thanks,
Tim Kerns -----Original Message----- From: Tim Kerns [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 11, 2003 6:49 AM To: '[EMAIL PROTECTED]' Cc: '[EMAIL PROTECTED]' Subject: FW: [smartBridges] Can not see SB AirBridge on Orinoco AP2000 Ivan, (this e-mail is direct and not on @part15.org) Back in April, you replied on this subject saying that SB was not answering on the special information packets (signal strength and e.t.s..). Could you explain further to Bill and I on what should transpire. Thanks, Tim Kerns -----Original Message----- From: Tim Kerns [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 9:29 PM To: 'Bill Clark' Subject: RE: [smartBridges] Can not see SB AirBridge on Orinoco AP2000 Bill, Here is a reply from the archives from IVAN KORSHUN back when I first brought this up: ************************************************************************ ******** To: [EMAIL PROTECTED] Subject: Re[2]: [smartBridges] Firmware Upgrade From: "IVAN KORSHUN" <[EMAIL PROTECTED]> Date: Wed, 16 Apr 2003 12:04:42 +0400 In-Reply-To: <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Sender: [EMAIL PROTECTED] ------------------------------------------------------------------------ -------- Hello, <....> > The one thing I am unable to see from all is the signal strength > and SNR coming from the AB's to the AP since the Orinoco AP's do not > display these devices. Firmware SB does not answer on the special information packets (signal strength and e.t.s.): ------------------------------------------------------------------------ ------ // Send Orinoco AP's 0000214926 003 75a0 042 99006e Data 00022d2737ba 00022d3c6787 00022d3c6787 000000> aa aa 03 00 60 1d 00 01 00 00 12 00 00 00 00 00 ....`........... 000010> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 000020> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 000030> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 000040> 00 00 .. //ACK client 0000000025 003 4d10 01e 7b0014 ACK 00022d3c6787 d1942d3c6787 00022d3c6787 000000> c8 21 84 5b 00 00 00 00 64 00 01 00 00 01 00 01 .!.[....d....... 000010> 04 82 84 0b 16 03 01 03 05 04 00 01 00 00 .............. // Send client "COMPAQ" 0000000639 003 0d60 042 7b006e Data 00022d3c6787 00022d2737ba 00022d3c6787 000000> aa aa 03 00 60 1d 00 01 00 01 12 00 43 4f 4d 50 ....`.......COMP 000010> 41 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 AQ.............. 000020> 00 00 00 00 00 00 00 00 00 00 00 00 62 35 00 6e ............b5.n 000030> 08 02 01 03 08 00 00 64 09 2a 09 2b 01 00 00 00 .......d.*.+.... 000040> 00 00 .. //ACK AP's 0000000026 003 4d30 01e 960014 ACK 00022d2737ba 05c92d3c6787 00022d3c6787 000000> d3 41 87 5b 00 00 00 00 64 00 01 00 00 01 00 01 .A.[....d....... 000010> 04 82 84 0b 16 03 01 03 05 04 00 01 00 00 .............. ------------------------------------------------------------------------ ------- There can be it will add in Firmware SB. -Ivan v -----Original Message----- From: Bill Clark [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 8:09 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Can not see SB AirBridge on Orinoco AP2000 Thanks! Tim. Now to find out why... Bill ----- Original Message ----- From: "Tim Kerns" <[EMAIL PROTECTED]> To: "'Bill Clark'" <[EMAIL PROTECTED]> Sent: Tuesday, 10 June, 2003 11:37 Subject: RE: [smartBridges] Can not see SB AirBridge on Orinoco AP2000 NO!!! And it sure creates a problem when you can not see the device from the AP or test from the AP. I use SimpleNMS to insure the devices are there, but it is only giving the receive side of the bridge. When I do a site survey, I use an Orinoco card to test. Since the AB's have more xmit power, I assume (there goes that word) the AP receive signal is equal or better than my test. So far no problems and I have deployed about 15 AB's. The price is right and I hate running LMR400. A footnote: I usually manually set the IP of the bridge in SimpleNMS, other wise SimpleNMS may not find it, and I do this before deploying at the customers site. Tim -----Original Message----- From: Bill Clark [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 10:19 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Can not see SB AirBridge on Orinoco AP2000 Tim, Did you resolve this problem? How? Thanks! Bill Clark Magnolia Road Internet Cooperative 296 Sandy Dr Boulder, CO 80302-9636 303.449.4878 [EMAIL PROTECTED] www.mric.net www.sugarloaf.net The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
