Hi Joe,
Thanks for your quick response. Can you please
provide APPO and airBridge firmware and simple monitor version you are using?
Seeni, SB support
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe
Sent: Friday, June 13, 2003 11:19
PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
trouble with units.
When I use short
preamble the Orinoco will not associate, the Aircarte I'm not sure(didn't try),
and the Airbridge has no change still locks up and has to be power cycled.
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Seeni
Sent: Friday, June 13, 2003 3:22
AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges]
trouble with units.
Hi Joe,
May I know the preamble settings of
the airBridge and APPO. Can you change the preamble settings to
“short” on the both devices. The Clients devices like
aircarte or Orinoco gold card also will use the same preamble settings as based
on the device settings.
Thanks
Seeni, SB support
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe
Sent: Friday, June 13, 2003 12:53
PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
trouble with units.
I
use an Orinoco gold card in my laptop and it shows a lost connection
spuradicaly but never sips a beat, I have an older airbridge that when the same
thing happens with it I have to power cycle it for it to recover. My access
point Is an APPO, my neighbor is using the aircarte (aircard ) and has the same
condition as I have with the gold card off the same AP. Don't know if this will
help but it does tell me that there is 2 problems. All other problems I fixed
with a 15v pwr. supply.
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Seeni
Sent: Thursday, June 12, 2003 11:30
PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges]
trouble with units.
Jerry,
Thank you and appreciate your
suggestion, but that could may be temporary solution to solve this problem.
We are not sure whether this feature will create any other issue. I
greatly accept your point and I will put your suggestion to our SB development
team for the consideration.
Thanks again Jerry,
Seeni, SB support
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Carter
Sent: Friday, June 13, 2003 12:01
PM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges]
trouble with units.
I do not understand why you (SB)
seem you do not want to add the watchdog (reboot) feature? I understand you
would like to find out the reason for this and fix it. But from what I
have read and the units I have that do it I am having a real hard time seeing
something in common with all of it. Adding the feature would still not be a bad
thing even if you did find the problem and fix it. But until then we have
certain anal customers that think it's a big pain to have to power cycle the
unit. This feature would make them happy and us:) My .02 of the day.
----- Original Message -----
Sent: Thursday,
June 12, 2003 10:02 PM
Subject: RE: [smartBridges]
trouble with units.
We are
investigating the cause of the issue and found your info is very useful.
Please capture the necessary information and send it to us.
Thanks
Seeni, SB support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Dino
Sent: Friday, June 13, 2003 9:11
AM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges]
trouble with units.
As far as age is concerned,
the 4 units that we have had the most problems with are about 6 months
old. I haven't had the problem with any totals (yet - and knocking
HARD). All are using the supplied 50' cable, with the power supply and
power shot that came with the units. One of the units is about 400' from
the sector with extremely clear LOS. I will be happy to run by tomorrow
and snap some pictures, if needed. These units mostly drop signal if they
do not pass data for a period of time.
----- Original Message -----
Sent: Thursday,
June 12, 2003 7:10 PM
Subject: RE:
[smartBridges] trouble with units.
Our
development is doing research and request us to gather more information. How
often does this happened? Are you able to log the Data continuously under Statistics
until the problem happen again. We need to see the log.
Is the
power source clean and stable?
Have you
tried with the 18V power supply instead of the supplied one for cable run above
100feet?
Is the
Ethernet cable tested good, connector, crimp, water leakage...
Also, do
you have the picture to show how the unit being mounted or placed?
For
reassociation, the airBridge will retry everytimes and if the signal is strong
enough, it will connect.
Alex
sB Tech
Support
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phantam
Sent: Friday, June 13, 2003 5:44
AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
trouble with units.
Guys the APPO's never freeze I have like 10 of them
deployed both appo and appoints and and none have ever frozen or needed to be
cycled (however I did it once to see if it was the radio or interference
causing problems ... it was interference) but the AB's seem to love freezing at
just the wrong time and I know its pissing off my customers, because eour
competitors 5ghz system has the same problem (also no watchdog) but that's why
they switched to me to not have to deal with that problem and look I have it
too :( I really need this fixed, also im not sure if it's the same thing but
prolongued periods of inactivity also causes the AB to freeze well perhaps its
not freezing maybe its just disassociating and forgetting to reassociate. Can
we get a reading of how often it tries to associate for how long and under what
conditions and also a watchdog reboot to fix units that just don't seem to want
to associate after 5 minutes I DON'T CARE IF the client sees the internet link
flash every 2 minutes if it resets and brings the link back up they will be
happy and besides its only gonna be doing it if the systems down anyway. Also
that fix for the remote ESSID change that doesn't work resorting back to old
one.
Thank you
PLEASE ALEX OR SEENI OR VASU we really need atleast
these features implemented ASAP our customers depend on it.
Chris
-----Original Message-----
From: Jerry Carter [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 12, 2003 12:24
PM
To: [EMAIL PROTECTED]
Alex did the development team like this idea?
Jerry
----- Original Message -----
From: "Alex Wong"
<[EMAIL PROTECTED]>
To:
<[EMAIL PROTECTED]>
Sent: Tuesday, June 10, 2003 5:16
PM
Subject: RE: [smartBridges] trouble
with units.
> OK, after so many votes I will put your
suggestion to the development
> team for consideration. Thanks
for the suggestion.
>
> Alex
> sB Tech Support
>
>
>
>
> -----Original Message-----
> From:
[EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
On Behalf Of Jerry Carter
> Sent: Wednesday, June 11, 2003
6:08 AM
> To: '[EMAIL PROTECTED]'
> Subject: Re: [smartBridges]
trouble with units.
>
>
> I have 2 units down right now
that have been up for weeks and I know a
> simple reboot will bring it
back online. Have it in the firmware where
> it will reboot 3 times thats
it. If it doesnt come back after 3 times
> you know there is a bigger
problem than just a lockup. If it is a real
> hard thing to do then I can
understand it. But if it's not that big of a
> deal to put this option in
there and make it optional then it would be a
> great solution for some of
these mystery problems.
>
> Please consider adding this
option.
> Jerry
>
> It just looks better for it to
fix itself than to have to call the
> user(or then call me) so that
I can tell them to power cycle the unit.
>
>
> ----- Original Message -----
> From: "Alex Wong"
<[EMAIL PROTECTED]>
> To:
<[EMAIL PROTECTED]>
> Sent: Tuesday, June 10, 2003
4:16 PM
> Subject: RE: [smartBridges]
trouble with units.
>
>
> > But if there is no
signal, the unit keep rebooting??? So it is not
> > that simple as what we
want it to be. We have to find the roof cause
> > of the problem and tackle
it. It is only a small percent having such
> > issue and the possibility
is either bad power supply or flash
> > corruption.
> >
> > Another area is to look
at environment and the installation proper
> > especially for outdoor
units. Pls see our Ideal Installation Guide.
> > http://www.smartbridges.com/new/support/ideal_install.php
> >
> > Alex
> > sB Tech Support
> >
> >
> >
> >
> > -----Original
Message-----
> > From:
[EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]
On Behalf Of Jerry Carter
> > Sent: Wednesday, June 11,
2003 4:42 AM
> > To:
'[EMAIL PROTECTED]'
> > Subject: Re:
[smartBridges] trouble with units.
> >
> >
> > I see the same problems.
Thats why I suggested they add in the
> > firmware that the radio
reboot itself after it locks or looses signal
> > over 5 min. I know it
would help in my situation. Usually a simple
> > reboot fixes everything.
> >
> > Jerry
> > ----- Original Message
-----
> > From: "George M.
Walden" <[EMAIL PROTECTED]>
> > To:
<[EMAIL PROTECTED]>
> > Sent: Tuesday, June 10,
2003 3:14 PM
> > Subject: Re:
[smartBridges] trouble with units.
> >
> >
> > >
> > > Ditto, on the
Ethernet issue w/ sB2100. We have had 3 customers
> > > that
> > needed
> > > replaced (as of now)
3 times each (total of 9 units).....all flaky
> > > units were from the
last shipment. Or, should I say, from the first
>
> > > batch of units that
made it to the USA from sB's new contract OEM.
> > >
> > > -George M. Walden
> > >
> > >
> > > on 6/10/03 1:19 PM,
Scott Damron at [EMAIL PROTECTED] wrote:
> > >
> > > > Yes,
> > > > My last one
would not see the AP and the ethernet and wireless
> > > > lights would go
out when you did a search for wireless networks.
> > > > It
> >
> > > > would see the
network when you rebooted, but when you tried to
> > > > assoc. it, it
would again loose both lights and freeze. Luckily,
> > > > we
> >
> > > > purchased them
from electro comm and they RMA'd them without
> > > > trouble.
> > > >
> > > > Scott
> > > >
> > > > -----Original
Message-----
> > > > From:
[EMAIL PROTECTED]
> > > > [mailto:[EMAIL PROTECTED]]
On Behalf Of David Blood
> > > > Sent: Tuesday,
June 10, 2003 10:52 AM
> > > > To:
[EMAIL PROTECTED] org
> > > > Subject: RE:
[smartBridges] trouble with units.
> > > >
> > > >
> > > > With my last
shipment of sb2100 I am having terrible issues. I
> > > > don't
> >
> > > > believe that it
is the configuration as I have set up many of
> > > > these and have
not had these problems in the past.
> > > >
> > > > Issues.
> > > >
> > > > Ethernet port
is flaky. Sometimes it works and sometime it
> > > > doesn't.
> >
> > > > No distance is
not an issue on the ethernet cable. All case less
> > > > than 50 ft and
in one case less than 5 ft. It seems to happen when
>
> > > > I
> >
> > > > make any
configuration change. I can power cycle the unit to get
> > > > it
> >
> > > > to come back.
> > > >
> > > > When I try
to use site survey to list availabe APs I get nothing.
>
> > > > When it does
work then several aps show up.
> > > >
> > > > The air bridges
lose associations and then wil not reassociate
> > > > with out a
reboot.
> > > >
> > > >
> > > > Anyone else
having these issues with the latest shipments?
> > > >
> > > > Kind Regards,
> > > >
> > > > David
> > > >
> > > >
> > > >
> > > >
> > > > The PART-15.ORG
smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > > > smartBridges
<yournickname> To Remove: mailto:[EMAIL PROTECTED]
>
> > > > (in the body
type unsubscribe smartBridges)
> > > > Archives: http://198.63.203.6
> > > >
> > > >
> > > > The PART-15.ORG
smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > smartBridges
> > > >
<yournickname>
> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body
type
> > > > unsubscribe
> > > > smartBridges)
> > > > Archives: http://198.63.203.6
> > > >
> > >
> > > The PART-15.ORG
smartBridges Discussion List
> > > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > smartBridges
<yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
> > smartBridges)
> > > Archives: http://198.63.203.6
> > >
> >
> >
> > The PART-15.ORG
smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > smartBridges
<yournickname> To Remove: mailto:[EMAIL PROTECTED]
(in
>
> > the body type unsubscribe
smartBridges)
> > Archives: http://198.63.203.6
> >
> > The PART-15.ORG
smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> smartBridges
<yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
> smartBridges)
> > Archives: http://198.63.203.6
> >
>
>
> The PART-15.ORG smartBridges
Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> smartBridges
<yournickname> To Remove: mailto:[EMAIL PROTECTED]
(in
> the body type unsubscribe
smartBridges)
> Archives: http://198.63.203.6
>
> The PART-15.ORG smartBridges
Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
smartBridges)
> Archives: http://198.63.203.6
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://198.63.203.6
</HTML
//Virus Scanned by: AF-Services Networks. //Updated Daily! /
|
