----- Original Message -----
Sent: Tuesday, June 17, 2003 7:13
PM
Subject: Re: [smartBridges] # of hops
possible
I will use whatever hardware works
best. I am going to be wireless directly from the provider
(colo at facility, directly connected to thier ethernet network) to the
access points. Many or most users will have thier link to
the ap's be the 4th link in my network.
Try as I might, I have not found a way to
shorten this to the originally designed single long hop to the point where
the AP's connect.
NEOFAST.NET
North
East
Oregon
FAST
Net
mark(at)neofast.net
----- Original Message -----
Sent: Tuesday, June 17, 2003 4:38
PM
Subject: RE: [smartBridges] # of hops
possible
You you using an AP in repeater mode or two APs (one in/one out)?
repeater mode cuts the BW in half but 2 APs only add a slight time delay.
Most of the delay is caused by an incorrectly config'd router. Use a good
router or none at all. Just connect the two APs with a
crossover.
It deviced by relatively half each jump you can go forever
but after a few hops may only have 2k throughput :)
-----Original Message-----
From:
Mark Koskenmaki [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 17, 2003 11:33 AM
To: [EMAIL PROTECTED]
What's the maximum number of consecutive hops possible,
and what is the loss
in throughput associated with
making these consecutive links?
NEOFAST.NET
North
East
Oregon
FAST
Net
mark(at)neofast.net
---
Outgoing mail is certified Virus
Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version:
6.0.489 / Virus Database: 288 - Release Date:
6/10/03
