Hi Mitra, Currently, our devices do not have DHCP/NAT option in the box and can be configured as a DHCP client only. Our future generation products may be will have this options based on the requirements. For this case, recommended to use router with those options in the customer premises. Airpoint indoor designed for the indoor use only. For the 200m radius, suggested to use airPointPRO outdoor with proper antenna. You can configure 2 airPointPRO to communicate each other. To do, configure 1 APPO in AP mode and another one CB mode.
Thanks Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mitra Sent: Wednesday, June 18, 2003 7:04 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] DHP/NAT at the access point? Any idea if this upcoming townspot might be able to do DHCP/NAT in the box as well, I'm looking at a situation where I need to supply a number of clients in a hot-spot. They are too far from each other (200m radius outdoors from central point) to run a wired lan, but need to be behind a single IP address which the AP can get from the backbone. Depending on bandwidth requirements this could either be a two AP or one-AP solution (i.e. one in Wireless Repeater, or one client and another AP), it looks like it could be done with an AP talking to something like a Senao SL-2511HS, but that would be a much more expensive solution. I could do it with a Linksys Access Point Router box, but that doesn't have the range of an Airpoint. I can't figure out how to do this with one or two Airpoints ? Any ideas? - Mitra -- Mitra Technology Consulting - www.mitra.biz - [EMAIL PROTECTED] home office 02-6684-8096 mobile 0414-648-722 work 02-6684-6182 Life is a Mystery to be Lived, not a Problem to be Solved The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
