I HAVE seen this whenever I do a remote essid change and it fails, maybe the text isn't being sent properly but in this case it messes up quite often. Once it messed up and I could swear it was screwed up but they reset it and it associated properly I don't know if it just was sent properly but not associated or it's a messed up command that the unit has to be rebooted after a essid change and it doesn't do it properly.
What could this be seeni?
Chris
-----Original Message-----
From: George [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 23, 2003 1:32 AM
To: [EMAIL PROTECTED]
One thing I don't do, is install any utility that allows them to get
involved in any way with the radio gear. The less they know the better we
all are.
Of course we always retain ownership of the radio.
I even do that with the gateway router in most cases, even though they do
buy that from me.
In most cases all we have to do is tell them to reboot their pc, gateway
router, or radio when they stop working.
George
----- Original Message -----
From: "Tom Andrews" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 22, 2003 9:28 PM
Subject: Re: [smartBridges] Weird Characters in ESSID and Loss of
association
> Have you seen an AP with the ESSID of ZUCimkXZ while doing any installs or
> war driving? Do these customers who had issues have access to
simpleMonitor
> and if so are they the type who might have played with the radio in an
> attempt to "fix" the connection?
>
> I have one who thinks they know more about our system than we do and they
> are always causing me issues by screwing around with all their settings.
> They are not using anything from smartBridge, but another radio I no
longer
> use. I guess I don't charge enough to go clean up their messes when they
get
> good and drunk.
>
> Tom
> ----- Original Message -----
> From: "Sam" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, June 22, 2003 23:28
> Subject: [smartBridges] Weird Characters in ESSID and Loss of association
>
>
> > Tonight I went to two of my customer's homes to re-associate their
> > airbridges. When I got there the ESSID had changed from logan-wt to
> > something like ZUCimkXZ and the BSSID was all zeros. Earlier this
weekend
> > another customer with an airbridge outdoor had the same thing happen.
His
> > ESSID changed from logan-wt to some jumble of letters.
> >
> > Got any idea what is causing this to happen? There are about 30 people
on
> > that AP (logan-wt). All three of these people are on the logan-wt AP. As
> > far as I know they are the only three that lost association, but this is
> > the third time in a month or so that it's happened. Are these defective
> > Airbridges? Their RSSI is > 50% and the Link quality is close to 80%.
They
> > are at most six miles from the AP, and one of them is only a couple of
> > miles away from the AP.
> >
> > Should I get an rma for these or do you think there is something else
> > causing this? They are all using 1.50 of the firmware, though I did have
> > the man with the outdoor airbridge backrev to 1.43 to see if that will
> > help.
> >
> > Thanks
> > Sam Morris, Owner
> > Loganet Internet Service
> > Logan IA
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> > Archives: http://198.63.203.6
> >
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://198.63.203.6
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
