The smartbridge is just that, a Bridge. Net stumbler gets the info from arp information in its broadcast permisc mode. Nasty thing on a network.
John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of shoffman Sent: Monday, June 23, 2003 3:40 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Site Survey Sorry for being confused, but if I am ONLY connected to the smartbridge via an ethernet cable (and no other wireless device on my computer), netstumbler will actually tell the smart bridge to scan all channels continuously? I thought it could only do that to devices PHYSICALLY attached to the machine (i.e. my machine is driving the radios...) realize that as far as my machine knows, the thing on the other end of that ethernet cable is a wired router, so how does netstumbler know? My bad if wrong, but I am sure I played with this and actually had to have the radio attached to my machine. (not just connected to it by ethernet) Scott -----Original Message----- From: scott damron <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Mon, 23 Jun 2003 14:15:13 -0500 Subject: RE: [smartBridges] Site Survey > Netstumbler will by default detect any wireless devices connected via > the > network you are attached to via wireless. > > Scott > > Quoting shoffman <[EMAIL PROTECTED]>: > > *<*>* How about a way to link netstumbler through to the Radio via > ethernet? > *<*>* That would be good enough for me... (i.e. I could use the SB > device as > *<*>* the radio Netstumbler is using.... > *<*>* > *<*>* Scott > *<*>* > *<*>* > *<*>* -----Original Message----- > *<*>* From: "Seeni" <[EMAIL PROTECTED]> > *<*>* To: <[EMAIL PROTECTED]> > *<*>* Date: Tue, 24 Jun 2003 02:46:47 +0800 > *<*>* Subject: RE: [smartBridges] Site Survey > *<*>* > *<*>* > Hi Mark, > *<*>* > > *<*>* > > *<*>* > > *<*>* > Yes, at the moment we do not have the spectrum survey tool. > Yes, I > *<*>* > appreciate your suggestion and I will send your suggestion to > our > *<*>* > development team for their consideration. > *<*>* > > *<*>* > Thank you and appreciate your suggestion. > *<*>* > > *<*>* > > *<*>* > > *<*>* > Seeni, SB support > *<*>* > > *<*>* > > *<*>* > > *<*>* > -----Original Message----- > *<*>* > From: [EMAIL PROTECTED] > *<*>* > [mailto:[EMAIL PROTECTED] On Behalf Of Mark > Koskenmaki > *<*>* > Sent: Tuesday, June 24, 2003 2:18 AM > *<*>* > To: '[EMAIL PROTECTED]' > *<*>* > Subject: Re: [smartBridges] Site Survey > *<*>* > > *<*>* > > *<*>* > > *<*>* > Please accept my apologies for being unclear. > *<*>* > > *<*>* > > *<*>* > > *<*>* > I do not mean a AP survey, I mean a spectrum survey, as shown > in the > *<*>* > link I provided. Teletronics and Demarc equipment have these > *<*>* > utilities > *<*>* > for thier equipment, but I don't wish to buy thier equipment, > just for > *<*>* > that capability. It would extremely helpful to have this > built into > *<*>* > all outdoor or outdoor capable equipment, so that EVERY > customer and > *<*>* > install can be easily surveyed for spectrum use issues before > AND > *<*>* after > *<*>* > install. > *<*>* > > *<*>* > > *<*>* > > *<*>* > The link below contains examples of how this is used. > *<*>* > > *<*>* > http://www.odessaoffice.com/wireless/survey.htm > *<*>* > > *<*>* > > *<*>* > > *<*>* > This is a request for something that does not exist in your > software > *<*>* at > *<*>* > present. > *<*>* > > *<*>* > > *<*>* > > *<*>* > Thank you for your quick response. > *<*>* > > *<*>* > > *<*>* > > *<*>* > Mark > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > NEOFAST.NET > *<*>* > North > *<*>* > East > *<*>* > Oregon > *<*>* > FAST > *<*>* > Net > *<*>* > mark(at)neofast.net > *<*>* > > *<*>* > ----- Original Message ----- > *<*>* > > *<*>* > From: Seeni <mailto:[EMAIL PROTECTED]> > *<*>* > > *<*>* > To: [EMAIL PROTECTED] > *<*>* > > *<*>* > Sent: Monday, June 23, 2003 10:48 AM > *<*>* > > *<*>* > Subject: RE: [smartBridges] Site Survey > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > > *<*>* > Hi mark, > *<*>* > > *<*>* > The site survey allows you to associate with airbridge with any > *<*>* > available Access points on the LAN(infrastructure mode) or with > *<*>* > different wireless clients(Adhoc mode) > *<*>* > > *<*>* > Please see our device simplemonitor's site survey and link > status > *<*>* tool. > *<*>* > > *<*>* > The Link status shows that actual LQ and RSSI values by > graphical > *<*>* > method(received signal strength indicator) > *<*>* > > *<*>* > > *<*>* > --- > *<*>* > Outgoing mail is certified Virus Free. > *<*>* > Checked by AVG anti-virus system (http://www.grisoft.com). > *<*>* > Version: 6.0.491 / Virus Database: 290 - Release Date: 6/18/03 > *<*>* > > *<*>* > > *<*>* > *<*>* The PART-15.ORG smartBridges Discussion List > *<*>* To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > *<*>* smartBridges <yournickname> > *<*>* To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > *<*>* smartBridges) > *<*>* Archives: http://198.63.203.6 > *<*>* > *<*>* > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
