Keep up the good work guys.
Thanks.........Dan
On Wed, 25 Jun 2003 12:35:55 +0800
"sB Tech Support" <[EMAIL PROTECTED]> wrote:
Hi All, I am glad to inform you that we have made improvement to the smpleNMS
after gathering some feedbacks and suggestions and the new version
simpleNMS 1.1 Beta Release is now available for download. If you are
existing simpleNMS users, you can use the existing simpleNMS username
and password at the same link which was emailed to you. If you have
misplace the link or forget the password access, you can request for the
password to be send again at
http://www.smartbridges.com/new/support/sendpw.php. Otherwise, please
submit your request for download at
http://www.smartbridges.com/new/support/download_software.php?software=s
impleNMS . Please be informed that this beta release will be for approximately 3
weeks, we will take in all suggestions till 20th July, please send your
feedback to <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Features in simpleNMS 1.1 Beta : * Bulk update of operational parameters of all devices a. CTS/RTS threshold values
b. Fragmentation threshold
c. Preamble
* Bulk update of operational parameters for the clients of a
particular airPoint. The parameters that will be updated are a. CTS/RTS threshold values
b. Fragmentation threshold
c. Preamble
* Bulk update of clients security settings for the clients of a
particular airPoint a. WEP key management - The user will select a
particular airpoint, whose WEP key settings needs to be changed. The
application will first update all the clients and then the airPoints WEP
settings.
b. The user can update the client devices passwords.
When he changes the device password, the corresponding entry in the
simpleNMS will also get updated.
* User information editing and viewing So far the simpleDeploy was giving an interface to write in some user
specific data. But there was no way to read it back. The simpleNMS
allows you to do this. The user can write in some important information
into the device like address where the client device has been setup etc.
* Email notification on Device outage The user provides an email address and the SMTP server to be used. An
email will be sent to the provided address once a device goes down.
* Network scanning Till date the simpleNMS had to be in the same network to do a search for
the devices. simpleNMS will now, get a starting IP address and the
network mask from the user and scan the whole network. So the user can
be anywhere and not necessarily in the same network.
* Updating clients associated to repeater AP Now you can update the clients of an aP and one of the client is in
repeater mode, it prompts the user to first update the clients of the
repeater before updating the main aP. This prevents the clients of the
repeaters not being updated when the main aP updates its clients and
thus preventing the clients of the repeater from loosing association.
Thanks and Best Regards, Alex
sB Tech Support
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
