Really...hmmm.....that sounds like a plan. Sully
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan @ Wyoming.com Sent: Sunday, July 06, 2003 10:05 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] How to find the associated speed ontherepeater and client radio Mark we use an old router that can have a modem hooked up to it so you can dial into it if your main router freezes up or your T1 drops. Then just access the master switch via Serail. Thanks.........Dan On Sun, 6 Jul 2003 21:39:01 -0700 "Mark P. Sullivan" <[EMAIL PROTECTED]> wrote: > 1. The masterswitches work well just so long as your router doesn't > freeze up. If the router freezes up, you obviously cant reset them > with > IP. I need an APC that has another method of rebooting it (i.e. > pager, > modem, etc). > > 2. Chris...you are pinging the units continuously?? > > Sully > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan @ > Wyoming.com > Sent: Sunday, July 06, 2003 9:31 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] How to find the associated speed on > therepeater and client radio > > Chris....Have you tried pinging the radio's that freeze up. We have > 3 > APO that were freezing up. We started a ping to all three radio's > and > they haven't skipped a beat since nor have they needed to be > rebooted. > > Thanks.........Dan > > > On Sun, 6 Jul 2003 20:35:29 -0400 > phantam <[EMAIL PROTECTED]> wrote: > > Kewl yeah for our AP's and backhauls we're installing > >masterswitches > > from > > apc so we can reset them from remote if anything. > > > > > > > > But I cant exactly do this at my clients and im still waiting on a > > fix to > > the AB freezing problem that SB says there working on. > > > > > > > > Chris > > > > > > > > _____ > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Sunday, July 06, 2003 6:28 AM > > To: [EMAIL PROTECTED] > > > > > > > > Chris, > > > > > > > > I've had an airpoint indoor as a backhaul in CB mode and it > >has > > yet to > > fail. It has been running straight for 2 1/2 months now (at a solar > > powered > > wipop). That's what I call reliable! :) > > > > > > > > I keep getting the feeling that the lockup problems that many of us > > have > > been having are due to bad power input and not conditioning the > > power > > sufficiently. > > > > > > > > I have a water tower that gets knocked out once or twice a week! I > > have to > > manually head over there and reset it. I'm in the process of > > building an > > on-line UPS (via battery charge controller, deep cycle batteries, > > and the > > works) and I have a feeling that once I do that my troubles will be > > gone. > > > > > > > > I'll keep you updated.. > > > > > > > > > > > > cheers, > > > > Paul > > > > > > > > > > > > ----- > > Paul C. Murdock [EMAIL PROTECTED] > > mobile/801.864.1024 - fax/801.446.0130 > > www.paulmurdock.com - for more info > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > On Behalf Of phantam > > Sent: Saturday, July 05, 2003 11:29 PM > > To: '[EMAIL PROTECTED]' > > Subject: RE: [smartBridges] How to find the associated speed on the > > repeater > > and client radio > > > > You can't this is a feature I have asked SB for, for the last 3 > > SimpleMonitor and simpleNMS releases but have yet to see then again > > I still > > wait for that Airpoint upgrade :( I was wondering does anyone know > > if the > > Airpoint indoor in clientbridge has the same freezing problem as > >the > > Airbridge indoors? > > > > Chris > > > > -----Original Message----- > > From: Tushar Patel [mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > ] > > Sent: Saturday, July 05, 2003 4:08 PM > > To: [EMAIL PROTECTED] > > > > Hi, > > > > How can I find out the associated speed of my repeater? > > > > Is there any place in the simple monitor which tells the speed the > > repeater > > or the client is associated to AP? > > > > Thanks, > > Tushar > > > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system (http://www.grisoft.com > > <http://www.grisoft.com> ). > > Version: 6.0.495 / Virus Database: 294 - Release Date: 6/30/2003 > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > (in the > > body type subscribe smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] > ><mailto:[EMAIL PROTECTED]> > > (in > > the body type unsubscribe smartBridges) > > Archives: http://archives.part-15.org <http://archives.part-15.org> > > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
