Here's a simply VPN layout: Client(10.0.0.1)-->Router(192.168.1.1)<--VPN-->Router(192.168.2.1)<-- (10.0.10.1)Client
Each router can be running NAT & DHCP. You can throw in an APPO on any side. > This is a multi-part message in MIME format. > > > Well does this mean the routers on each end running dhcp at the location will not do it? The routers have the 10. ip's on the wan side and running dhcp on the inside. My main question would be what do I have to supply this guy for him to be able to set this up? At this point he is paying someone else the big bucks for doing his networking. I just want to make sure it's possible going thru the appo like I have it setup below. > > ----- Original Message ----- > From: Laurence Laforga > To: [EMAIL PROTECTED] > Sent: Wednesday, July 09, 2003 3:27 AM > Subject: RE: [smartBridges] VPN Question. > > > VPN tunnels must be on different subnet. > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:smartBridges- [EMAIL PROTECTED] On Behalf Of Jerry Carter > Sent: Tuesday, July 08, 2003 6:33 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] VPN Question. > > > > Ok I have to say I have not set one of these up yet. I do have a client that has there own special network guy telling me that they have to have a real world IP that is not routed? I run nat on a mikrotik router and route static Ip's to there internal IP if they need one. The client is connecting to an appo about 1 mile away from his office that is also connected to the same appo. They both have 10.0.100.XX IP's(with real world IP's routed to them). I'm sure the firewalls mike make a difference whether this is possible but do I need to do anything but make sure that client to client communication is allowed on the ap? > > > > Jerry > > > Laurence Laforga TIRGON Communications, LLC. dba Waipahu.Net Wireless Broadband The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
