I also HATE the boot....
----- Original Message ----- 
From: "Roger Howard" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 10, 2003 4:21 PM
Subject: Re: [smartBridges] Powershot


> Ok, I'm fine with that... eliminate the boot.. and spend the extra 2c you
> spared on a better power socket... then we'll have the perfect powershot.
>
> It looks a bit nicer and finished with a boot on it, but functionality is
> more important.
>
> Thanks,
> Roger
>
> ----- Original Message ----- 
> From: "Eric Calkins" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, July 10, 2003 3:11 PM
> Subject: Re: [smartBridges] Powershot
>
>
> > I agree, it does not need to be there.  Pain in the butt!
> >
> > Eric :)
> >
> >
> >
> >
> > Dan Petermann wrote:
> >
> > > Get rid of it all together, I hate those things.  I take the scissors
on
> > > my leatherman and
> > > cut it off.
> > >
> > > Dan Petermann
> > > wyoming.com
> > >
> > > At 03:02 PM 7/10/2003 -0500, you wrote:
> > >
> > >> While we're talking about powershots, for the next version, can you
> > >> make the
> > >> boot on the RJ45 connector that goes into the PC/switch a bit softer
> > >> plastic? It's sometimes next to impossible to squeeze the thing
enough
> to
> > >> unclip it. My thumb is still hurting from the last one I had to
> > >> unplug. It's
> > >> especially difficult because these are often plugged in in very
awkward
> > >> places. You almost need a pair of plyers to get them out!
> > >>
> > >> Thanks,
> > >> Roger
> > >>
> > >> The PART-15.ORG smartBridges Discussion List
> > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > >> smartBridges <yournickname>
> > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > >> smartBridges)
> > >> Archives: http://archives.part-15.org
> > >
> > >
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > > smartBridges <yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > > smartBridges)
> > > Archives: http://archives.part-15.org
> > >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> > Archives: http://archives.part-15.org
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to