Do you mean you can get it to work with airBridge Outdoor but not the Indoor? That's strange. If you set to use static IP, can the PC able to reach DHCP server? Please also see if you can capture the trace from the DHCP server side.
Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erik Turk Sent: Saturday, July 12, 2003 8:33 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] My Airbridge (Indoor) dhcp problem I was at client #13 (!!) trying to use an airbridge indoor (my first one - most clients are on airbridge outdoors with panels from superpass) I had great signal strength when I logged in from my laptop to simplemonitor - I was associating fine to the ap (which is a repeater) My blue light on the airbridge stayed blue, indicating that the unit was maintaining association. My laptop and the repeater radio are on the same subnet (172.26.0.0) , as is the access point that the repeater (appo) talks to. The clients are on 10.0.0.0 Once I know I have good signal strength, Usually what I do is un plug the cat-5 from the powershot from my laptop, then plug into the clients router or computer. The router or client computer gets a dhcp address and then I'm outa there. But I couldn't get a dhcp address through the airbridge indoor. The radio itself has a static ip address, and I tried it setting the primary dhcp port to both wireless (which was my logical choice) and ethernet (out of desperation) It wouldn't get an address either for the client computer, or for the dlink 604 router that I carry with me. In the end, I brought in a trusty airbridge outdoor from the vehicle, plugged it in, and it just worked like "normal" - it gets a dhcp address for the client computer, and away we go. I told them that I would be back next week to tidy up - and I want to replace the airbridge outdoor that is indoors at their house with an airbridge indoor.... whew! We're not using simple deploy before we go out, just installing them "cold" I want to use more airbridges (indoor), because I've installed this repeater, which will let me use the airbridge indoor instead of airbridge outdoor units, at a significant cost reduction. O great and knowledgeable smartbridges list, what am I doing wrong? Why won't my airbridge work just like the trusty airbridge indoors I know and love? Erik The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
