Are there any data sheets or any material to read about some of the details that will be in Nexus?
Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Nish Park > Sent: Saturday, July 12, 2003 11:06 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Here I come from ETSI land > > > With the current radio the range can not be lowered below 11.5dB. > For our new hardware platform Nexus due to be released in Q4 it will be > possible to do this. > > Nish > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Leszek Olszewski > Sent: Sunday, July 13, 2003 1:44 AM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] Here I come from ETSI land > > Hello, > > I come from ETSI land and as most of you know we have legal limits of > +20dBm EIRP. > > The question is - is it possible to reduce Smartbridges radio TX power > (SB > in general, I believe radios used in your devices are equal) down to say > > +3dBm? By doing this I could use higher gain antena, stay within legal > EIRP > limit and achieve longer link. > > Now, I do know that there's dial-a-power which allows regulation down to > > 11.5dBm. I am also aware that SB units can be managed via generic Atmel > SNMP configurator and there you can put hex values for each channel to > manipulate TX power. These guys > http://www.dcom.cz/docs/wlan/wen2021/vykon2021.htm claim they could > drive > similiar device down to -8dBm (!). > > Can someone please confirm or deny this and possibly provide some > further > explanation why or why not that is possible? > > I'll appreciate some in-depth technical answer, if possible. > > Regards, > Leszek > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
