I'm not using the 120's in a circle I have literally them pointing across each other but pointing at different downtilts between 0degrees and 20 degrees to give short mid and long range cover.
Chris
-----Original Message-----
From: Tom Haynes [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 17, 2003 2:19 PM
To: [EMAIL PROTECTED]
Read up on sectors if you have not yet. Using 3 120* created a lot more
overlap than you think and can cause strange thinkg to happen to your signal
pattern. I believe that Scott recommends 3 90* sectors for 360* coverage,
but you would have to ask Scott to be sure.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Dan Petermann
Sent: Thursday, July 17, 2003 9:34 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] AirPointPRO TOTAL
That is what I thought. I've been looking at setting up 120 degree sectors.
I like the high gain but the vertical beam width is just too narrow. 6.5
degrees! Or is it 13? (+/- 6.5)
I'm looking at getting the Maxrad MS024014PTNF (sectorized omni). Has anyone
used these? Any horror stories to be aware of?
This will be my first sectorized site so I'm hoping for great things.
Dan Petermann
Wyoming.com
At 09:05 AM 7/17/2003 -0400, you wrote:
>With that small of a VBW ? Are you far away from your clients ?
>
>---------- Original Message ----------------------------------
>From: phantam <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>Date: Thu, 17 Jul 2003 09:02:17 -0400
>
> >That's what I have just got done installing 6 of them :) and 2 180's
> >
> >-----Original Message-----
> >From: Ray [mailto:[EMAIL PROTECTED]]
> >Sent: Wednesday, July 16, 2003 10:00 PM
> >To: [EMAIL PROTECTED]
> >
> >Check this one out. Note that they also have a 90deg.
> >
> >http://hyperlinktech.com/web/hg2420p_120.php
> >
> >
> >----- Original Message -----
> >From: <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Wednesday, July 16, 2003 8:46 AM
> >Subject: RE: [smartBridges] AirPointPRO TOTAL
> >
> >
> >> > Think about it for a sec. It comes with a 13db antenna. We've
> >> > been mentioning throughout different threads that SB is
> >> > mistakenly limiting everything for FCC territory to a max of 30db
> >> > instead of the allowed 36db so 17.5db max radio output minus
> >> > 0.5db for some kind of internal pigtail plus 13db is 30db. That's
> >> > 1/4 of the power you are allowed to use. You wont get anywhere
> >> > with that.
> >> >
> >> > Kevin Summers
> >> > KISTech Internet Services Inc.
> >> > www.kistech.com
> >>
> >> I was contacted by someone who claims to have a 21dB sectored
> >> antenna. I'm interested. The fool thing is 72" tall (2 meters!!!)
> >> and about 6" wide. But I'm interested.
> >>
> >> Tim Foster
> >> www.AledoBroadBand.com
> >> Aledo's only high-speed ISP
> >>
> >> The PART-15.ORG smartBridges Discussion List
> >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname>
> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type
> >> unsubscribe
> >smartBridges)
> >> Archives: http://archives.part-15.org
> >>
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED]
> >(in the body type unsubscribe
> >smartBridges)
> >Archives: http://archives.part-15.org
> >
> >
>---
>[This E-mail scanned for viruses by Declude Virus By Avolve.net]
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
