I have a customer who just bought a new PC. They asked me to set it up to access my fixed wireless service for them. OK, should be straight forward.. but when I set it up, the speed is very inconsistent. Pages sometimes take a while to load. It was strange because ping times were all excelent.
Anyway, I tracked it down to the NIC. It was set to Auto, but when I set it to 10Mbit half duplex, the problems went away. So what is the ideal setting if you have to set this manually, when it's plugged directly into a smartBridge unit? I know the smartbridges have a 10 Mbit ethernet port, but is it half duplex or full duplex? Thanks, Roger The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
