My mis-type... ooops... I am using the 13db Maxrad panel in horiz now. I will move up to the 18db Maxrad and maybe even rotate it a bit to x-polarize and attenuate the multipath. Hopefully there is still some signal left after the multipath is dropped out.
Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Friday, July 18, 2003 12:17 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Multipath Solutions I have a number of shots going over water. 5ghz and 2.4ghz. Horizontal Polarity is your friend in these cases. Also, why are you using such a low gain antenna? Jeremy On Fri, 18 Jul 2003, Dave Covert wrote: > RE: [smartBridges] New FirmwareI am trying to install an aBO on ch11 with a > 9db Maxrad panel in a marina. The tower is about 1.1km away with loads of > sailboat masts, apartment buildings and one other WISP on ch01 in the way... > no where near clean line-of-sight, but I am still getting a RSSI of 77% and > a LQ of 90%. Not bad... > > The thing that is bad however is the thru-put... only about 50% of the pings > make it there and back. Almost none of the packets longer than a ping make > it... > > I am guessing I am in multipath hell... anyone know of proven techniques to > moderate the effects of multipath? > > Dave > Home Wireless Company > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
