Hello sB, This is not the response I want to see or hear about a product that is in my network. "MAGIC" is BS when the customer quits telling me they are always down.
I don't believe for an instant that "firmware" is fixing an overheating issue. I was trained as an Electronics Tech and have 12 plus years of fixing electronics to the board level as experience. Adding some code is not going to change a flaky component. Basically is the firmware degrading the radio operation to the point the component does not overheat? Fortunately, I only have a few SB products left in the system plus the ones in the junk box. Barry Monday, July 21, 2003, 2:05:44 PM, you wrote: sTS> I know this is hard to believe. Sometimes when you try to associate to sTS> AP that has no WEP enabled, it tell you to check the authentication and sTS> WEP, try do a power cycle the unit or reboot the PC, it may work then. sTS> It is just a magic trick. sTS> Alex sTS> sB Tech Support --- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
