I'd be interested if SB could confirm this one!
Loop Scorpio Ltd providers of Ledbury Broadband and Highnam Broadband www.ledburybroadband.co.uk www.highnambroadband.co.uk -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kevin Summers Sent: 22 July 2003 19:42 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Basic Settings Rates? I've noticed that whatever you check (and this happens with all manufacturer's radios) the radio always connects at the best possible speed. So even if your intention is to have them only connect at 1Mbit if it has enough signal it will connect at 11Mbit. Kevin Summers KISTech Internet Services Inc. www.kistech.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jerry Carter Sent: Tuesday, July 22, 2003 11:34 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Basic Settings Rates? OK stupid question of the day. In the app on the basic tab. Why would you not just have the rates at 11mbps with auto fall back rate checked? If you just want to limit the customer can you not at the airbridge to only 1 meg? I have my app's setup this way and wondered if there were any reason to check all the boxes and auto fallback. Jerry The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
