If you used simpleDeploy prior to deployment, then you can just ask all your users to hold the pin hole reset in for 30 secs.
If you didn't run simpleDeploy prior to deployment, then take this opportunity to do so on your upcoming marathon truck roll. Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno Sent: Monday, August 04, 2003 8:56 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING SETTINGS WITH SIMPLE NMS Yes that will work I am sure, but all thats going to do for me is require a truck roll to over 50 users and I will have to reconfigure the radios again. Thats what I did not want to have to do Quoting The Wirefree Network <[EMAIL PROTECTED]>: > I have been able to regain my remote management capability (for some) by > having the user do the "restore to factory default" (with pin hole on > POE). > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno > Sent: Monday, August 04, 2003 8:44 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING > SETTINGS WITH SIMPLE NMS > > I did not upgrade them I just changed some settings. That's it already > did the > upgrade last week to the new firmware which went well. The problem I am > having > is I used simple NMS to change RTC CTS settings on all the radios > instead of > doing each one at a time. I did this like 5-6 times before and this last > time > BAM no more being able to log in with my password or any other password > which > has really screwed me as the settings I changed to were worse and I have > people > calling me all day long. ARGHHH so my question was do I have to do a > hard rest > to default on each unit which would take all damn week which I have NO > time > for. I hate having these darn glitches every so often and when they > happen they > really hurt. > > > . Quoting [EMAIL PROTECTED]: > > > This won't help you now, but ALWAYS ALWAYS ALWAYS roll out upgrades to > two > > or three units first. Regardless if you are managing servers, routers, > > wireless bridges, whatever. > > > > On Mon, 4 Aug 2003, Martin Moreno wrote: > > > > > Asking once again has anyone done an update to all radios with > simple nms > > and > > > not be able to log back into any of the radios with the password > that was > > set > > > for each one? All radios show up and I can click on them and see > they are > > > running and I can reboot all them at once with simple nms with the > password > > I > > > set but I can no longer log in to manage them I keep getting the > check > > password > > > screen when trying to log in. I tried the "public" password and that > will > > not > > > work either. > > > > > > I need to adjust the settings ASAP and I dont have the time to go to > 50 > > houses > > > to trouble shoot any ideas on what the cause and what the remedy is > to get > > back > > > into the radios?? > > > > > > Thanks > > > > > > -M > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > Martin Moreno > Blazen Wireless > 909-907-4106 > www.blazenwireless.com > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
