Thanks Sully but I wont have to read my other posts VERY strange behavier. Can you run simple deply remotely over the air?? that would be nice!
Quoting The Wirefree Network <[EMAIL PROTECTED]>: > If you used simpleDeploy prior to deployment, then you can just ask all > your users to hold the pin hole reset in for 30 secs. > > If you didn't run simpleDeploy prior to deployment, then take this > opportunity to do so on your upcoming marathon truck roll. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno > Sent: Monday, August 04, 2003 8:56 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING > SETTINGS WITH SIMPLE NMS > > Yes that will work I am sure, but all thats going to do for me is > require a > truck roll to over 50 users and I will have to reconfigure the radios > again. > Thats what I did not want to have to do > > > Quoting The Wirefree Network <[EMAIL PROTECTED]>: > > > I have been able to regain my remote management capability (for some) > by > > having the user do the "restore to factory default" (with pin hole on > > POE). > > > > Sully > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno > > Sent: Monday, August 04, 2003 8:44 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING > > SETTINGS WITH SIMPLE NMS > > > > I did not upgrade them I just changed some settings. That's it already > > did the > > upgrade last week to the new firmware which went well. The problem I > am > > having > > is I used simple NMS to change RTC CTS settings on all the radios > > instead of > > doing each one at a time. I did this like 5-6 times before and this > last > > time > > BAM no more being able to log in with my password or any other > password > > which > > has really screwed me as the settings I changed to were worse and I > have > > people > > calling me all day long. ARGHHH so my question was do I have to do a > > hard rest > > to default on each unit which would take all damn week which I have NO > > time > > for. I hate having these darn glitches every so often and when they > > happen they > > really hurt. > > > > > > . Quoting [EMAIL PROTECTED]: > > > > > This won't help you now, but ALWAYS ALWAYS ALWAYS roll out upgrades > to > > two > > > or three units first. Regardless if you are managing servers, > routers, > > > wireless bridges, whatever. > > > > > > On Mon, 4 Aug 2003, Martin Moreno wrote: > > > > > > > Asking once again has anyone done an update to all radios with > > simple nms > > > and > > > > not be able to log back into any of the radios with the password > > that was > > > set > > > > for each one? All radios show up and I can click on them and see > > they are > > > > running and I can reboot all them at once with simple nms with the > > password > > > I > > > > set but I can no longer log in to manage them I keep getting the > > check > > > password > > > > screen when trying to log in. I tried the "public" password and > that > > will > > > not > > > > work either. > > > > > > > > I need to adjust the settings ASAP and I dont have the time to go > to > > 50 > > > houses > > > > to trouble shoot any ideas on what the cause and what the remedy > is > > to get > > > back > > > > into the radios?? > > > > > > > > Thanks > > > > > > > > -M > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges > > > <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > Martin Moreno > > Blazen Wireless > > 909-907-4106 > > www.blazenwireless.com > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > Martin Moreno > Blazen Wireless > 909-907-4106 > www.blazenwireless.com > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
