Seeni

Why doesn't Smartbridges make these plugs available?

Sam

On Wed, 6 Aug 2003, sBTech wrote:

> Hi Rob Cleminson,
> 
>  
> 
> An 18 V DC plug is an ideal and sufficient plug however you have to make
> sure that the polarity of the plug should as specified in the website.
> 
> http://www.smartbridges.com/new/products/ps.php
> 
>  
> 
> Few customers are using Motorola Canopy Powershot which is 24V and it is
> same pin as sB.
> 
> Also you can use the following powersupply, however you need to change
> the Pin polarity as stated in the specification.
> 
> Brand: Mouser
> 
> Model: 552-PSA-31U-180 [EMAIL PROTECTED]
> 
>  
> 
> To help you procure the correct power supply adapter, the specification
> of the power adapter is :- 
> 
> 
> Output Voltage Range 
> 
> Regulated between 15V to 18V (max) 
> 
> 
> Current Ratings 
> 
> 1 Ampere 
> 
> 
> Type of Plug 
> 
> Barrel Type 
> 
> 
> Plug Polarity 
> 
> outer body = +ve, center = -ve 
> 
> 
> 
> Diameter of plug 
> 
> Inner Diameter of the plug = 2.5mm 
> Outer Diameter of the plug = 5.5mm 
> 
> 
> Length of the plug 
> 
> 10mm or more 
> 
>  
> 
> Thank you
> 
>  
> 
> Seeni, SB support
> 
> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Rob Cleminson
> Sent: Wednesday, August 06, 2003 12:57 AM
> To: '[EMAIL PROTECTED]'
> Subject: [smartBridges] AirPoint-Pro Outdoor
> 
>  
> 
> Hi,
> 
>  
> 
> I just purchased my first Airpoint Pro Outdoor - Powered it up fine on
> my desk. 
> 
>  
> 
> Just got down from installing on my tower - I have 100Metres of CAT5 and
> now no power is arriving at the unit?
> 
>  
> 
> Is this because I am using the standard 12V AC Adapter and because of
> the extra cable length now need 15V. There is a note in the booklet
> suggesting that this is best but I am not sure if it is a MUST
> 
>  
> 
> Any advice?
> 
>  
> 
> Regards
> 
>  
> 
> Rob Cleminson
> 
>  
> 
> 

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to