Hello. The RSSI is fairly constant, from -27dB to -29dB, and the Link Quality ranges from 90% to 92% with very little variation. However, if there is a problem with transfers, both lines on the graph drop to 0 for a second or two and then jump back up for a few seconds.
The AP is a StarOS AP and yes, it reports as Long Preamble. (Not that I know what long and not-long preamble do...) - Todd Chamberlain ----- Original Message ----- From: "sB Tech Support" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 14, 2003 6:17 PM Subject: RE: [smartBridges] New SB Firmware The link status usually tells us it is interference or noise in the wireless link. Is the RSSI stays consistence? Try changing to other channel. Do you use Long Preamble? Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Support(at)inet2000.com Sent: Friday, August 15, 2003 6:56 AM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] New SB Firmware The symptom I see is the link status graph dropping from 92% to zero for a second and then jumping back up for a few seconds. If I'm doing a ping during this time, I see an timeout during the drop-out, and then they'll resume once the graph jumps back up. I don't know if this is the way the graph normally handles packet loss or adaptive rate shifting or what. It's just a frustrating thing for the customer, who has a link that works perfectly 8 miles out for two days, and then they get < 1K uploads for three hours. - Todd Chamberlain From: "The Wirefree Network" <[EMAIL PROTECTED]> > The heat related issues that one batch of equipment had caused the unit > to lose association. For me at least. It did not cause slow > throughput. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Support(at)inet2000.com > Sent: Thursday, August 14, 2003 3:21 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] New SB Firmware > > Hello all. I unsubscribed from this list a few month's back and > am just back today. I notice that there is new FW that says it'll > stop heat related problems. Does anyone have any comments > (good / bad) on this new firmware? (I know I should read the > archives first, but I've got customer with problems with slow > uploads at times that I'm thinking may be heat related) > - Todd Chamberlain > > ----- Original Message ----- > From: "Bill Clark" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, August 14, 2003 3:38 PM > Subject: Re: [smartBridges] MACs through an AB > > > > Let's go a bit further... > > > > What does the aB present in its DHCP-request packet: > > uid = 01:<aB_MAC> > > client-hostname = <aB_name> ? > > > > What does the aB present in a host DHCP-request packet: > > uid = 01:<aB_MAC> > > client-hostname = host-supplied <client-hostname> > > or > > client-hostname = <host_MAC> ? > > > > Bill > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
