Sully This is exactly what one of mine was doing back when all of this first started. I changed teh preamble from short to long and it stopped doing that. I'm not betting that that will fix your's, but it worked for me (for a while) and is simple to try.
Sam On Fri, 15 Aug 2003, The Wirefree Network wrote: > Oh...forgot one thing. During the 5 minute period of the aPPo's > working...I was watching the statistics and noticed that the unit's kept > rebooting. The statistics would keep going back to zero. Then it just > died. > > What the heck is going on?!?!? > > Sully > > -----Original Message----- > From: The Wirefree Network [mailto:[EMAIL PROTECTED] > Sent: Friday, August 15, 2003 9:26 PM > To: '[EMAIL PROTECTED]' > Cc: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'; > '[EMAIL PROTECTED]' > Subject: 2 New aPPo's DONT WORK > Importance: High > > I received an aPPo from Electro-Comm that I PAID EXTRA for to have it > overnighted to me so that I could replace a faulty aPPo (firmware > issue). > > First thing I did was upgrade the firmware like the STICKER says on the > box. Then burned in my settings with simpleDeploy. All went well. > > I replaced it and it worked like a champ--all clients reassociated! > Woohooo!! Five minutes later clients started dropping off and the > Ethernet side died! I did a power reset and it came back up but only a > few clients associated back up with it. So...I waited a couple minutes > and the Ethernet side died again. > > I reflashed it...I lowered the firmware...I reflashed it...I upgraded > the firmware...I replaced the powershot twice...I did EVERYTHING! The > Ethernet side would keep crashing. In case it matters to anyone...it > was only 70 degrees here today. > > So...I put my old unit back up (after only 3 hours of MY LABOR WAISTED) > and it worked fine. My old unit periodically crashes..and that is why I > am RMAing it. > > Yesterday...I received my stock (and spares) from Electro-Comm. I > started the process ALL OVER AGAIN...with the exact same results (3 more > hours waisted). The Ethernet side DIED after 5 minutes. > > I am once again back on my old aPPo...I have a bunch of pissed off > customers....and I am VERY pissed myself. I am soooo sick of spending > hours upon hours replacing bad equipment. > > sB...can you please send me 2 aPPo's from Singapore...that you have > actually verified work for longer than 5 minutes?!?! > > Sully > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
