At 02:52 PM 8/25/2003 -0700, you wrote:
Out of curiosity try raising the fragmentation back to default of 2346 and see if it lets you back in!
----- Original Message ----- From: "Jason Duncan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, August 25, 2003 1:59 PM Subject: [smartBridges] ABO disassociation problems
I have a small apt complex with 10 ABO's on the roof of 10 buildings all running the latest firmware plugged into a dsl system at the base of each building. The ABO's all point back to an APP running the latest fw. After doing the latest fw upgrade I also lowered the rts/cts and fragmentation down to 1500 on all radios. I am now getting disassociations from all of the radios and cannot get in with simple monitor. I have to physically reboot the radios to get them to come back up.
Any ideas here will moving the rts/cts back up to default help?? I was not having near this many problems until after the fw upgrade and the changing of the thresholds. Thanks
Jason Duncan Trynetics LLC 480-964-6980
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
Jason Duncan Trynetics LLC 480-964-6980
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
