I'm not suggesting the firmware upgrade changed the setting. Just that the AB that had the primary port set incorrect (and worked fine with the previous firmware) stopped working after the upgrade until we set the primary port was set correctly (to wireless).
It was just a suggestion to check. Leroy On Tue, 26 Aug 2003 06:31:15 +0800, Seeni Mohamed wrote > Upgrading new firmware does not changes configuration internally. > > Seeni, SB support > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Leroy Koglin Jr. > Sent: Tuesday, August 26, 2003 6:04 AM > To: '[EMAIL PROTECTED]' > Subject: Re: [smartBridges] ABO disassociation problems > > After loading the latest AB firmware we saw the same problem. The > primary > port on the AB was not set to wireless. Not sure why this only > became an > > issue with the latest firmware. > > Leroy > > On Mon, 25 Aug 2003 14:52:22 -0700, Blazen Wireless wrote > > Out of curiosity try raising the fragmentation back to default of > > 2346 and see if it lets you back in! > > > > ----- Original Message ----- > > From: "Jason Duncan" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, August 25, 2003 1:59 PM > > Subject: [smartBridges] ABO disassociation problems > > > > I have a small apt complex with 10 ABO's on the roof of 10 buildings > > all running the latest firmware plugged into a dsl system at the > > base of each building. The ABO's all point back to an APP running > > the latest fw. After doing the latest fw upgrade I also lowered the > > rts/cts and fragmentation down to 1500 on all radios. I am now > > getting disassociations from all of the radios and cannot get in > > with simple monitor. I have to physically reboot the radios to get > > them to come back up. > > > > Any ideas here will moving the rts/cts back up to default help?? I > > was not having near this many problems until after the fw upgrade > > and the changing of the thresholds. Thanks > > > > Jason Duncan > > Trynetics LLC > > 480-964-6980 > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > (in the body type unsubscribe smartBridges) Archives: > > http://archives.part-15.org > > -------------------------------------------------------------------- > Leroy A. Koglin Jr. > Zimco, Inc. > Air Advantage, LLC > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > (in the body type unsubscribe smartBridges) Archives: > http://archives.part-15.org -------------------------------------------------------------------- Leroy A. Koglin Jr. Zimco, Inc. Air Advantage, LLC The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
