Dimitrios & Nish,
You are both correct in a way. Most WIPSers are not RF experts and should
avoid amps since a "well designed system" is much harder to do using amps.
On the other hand, a lot of "trial and error" can go a long way in making
someone an expert ;-) The effects of reflection and multipath become more
extreme when you use amps and that is the part that requires the most
"magic". I would recommend against amps unless you know what you are doing
or have the guidance of a radio engineer but there are a VERY FEW situations
when you should use an amp.

*I realize that both of you know this stuff, just commenting out loud for
everyone else*

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Dimitrios Sidiropoulos
Sent: Wednesday, September 03, 2003 12:46 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Combined power of radio/antenna


Nish,

> Avoid use of Amp like plague.

We have installed about 120 Amps in the past 5 years.
A well designed setup will not sufer from the addition of an Amp
On the contrary the benefits are multiple.

Thank you
Dimitri

> We have seen all kinds of strange things go on in the system. When the
> operator removes the Amps and make proper use of directional antennas,
> things improve and network becomes stable.
>
> Nish
> smartBridges
>
>
> -----Original Message-----
> From: Pascal Losier [mailto:[EMAIL PROTECTED]
> Sent: Thursday, September 04, 2003 1:16 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] Combined power of radio/antenna
>
> How about 500mw amp & a three way splitter ???
>
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Stuart Pierce
> Sent: Wednesday, September 03, 2003 2:11 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] Combined power of radio/antenna
>
>
> Oh yea, without a doubt.
>
> ---------- Original Message ----------------------------------
> From: Sevak Avakians <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> Date:  03 Sep 2003 11:29:41 -0400
>
>>Quick question:
>>If you have a 3-way splitter into 3 sector antennas and 1 APPO, is the
>>quality improved by removing the splitter and using 3 APPOs?  Is this
>>the receive quality or transmit quality or both?
>>
>>
> ---
> [This E-mail scanned for viruses by Declude Virus By Avolve.net]
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> the body type unsubscribe smartBridges)
> Archives: http://archives.part-15.org
>
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to