RE: [smartBridges] Combined power of radio/antenna

[Sevak Avakians]

Seeni, Just to get this straight; you said that if power received and transmitted from each of the antenna will be half because a single APPO is being used to power the 3 antennas. Did you mean power would be a third since it is 3 antennas?? Thanks! Sevak On Wed, 2003-09-03 at 12:38, Seeni Mohamed wrote: You can use a 3 way splitter to power 3 sector antennas, however each splitter will introduce approx. 3.5 dB loss and also the power received and transmitted from each of the antenna will be half because a single APPO is being used to power the 3 antennas. Yes, definitely it will improve the send and receive quality by adding 3 aPPO individually. In this case, each unit should operate at the different frequency to avoid any channel interference.   Seeni sB Tech Support [EMAIL PROTECTED]   -----Original Message----- From: Sevak Avakians [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 03, 2003 11:30 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Combined power of radio/antenna   Quick question: If you have a 3-way splitter into 3 sector antennas and 1 APPO, is the quality improved by removing the splitter and using 3 APPOs?  Is this the receive quality or transmit quality or both?