YES finally companies working together! Maybe this will solve the general atmel sleep issue on the AP's and APPO's damian and alex can you both keep us posted on this issue would be much appreciated.
-----Original Message-----
From: Damian Wallace [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 04, 2003 11:29 AM
To: [EMAIL PROTECTED]
Importance: High
Alex,
Please call me directly. We may be able to work something out to get
you a unit. We most definitely have seen the issue with the
AirPointPro.
If anyone on the list does have this issue, pinging the unit once every
20 minutes or so does make the issue go away.
Damian Wallace
Product Manager
Tranzeo Wireless
604-460-6002
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of sB Tech Support
Sent: Thursday, September 04, 2003 12:03 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] SB/Tranzeo
Tranzeo Tech support trying to imply that our product does not meet the
IEEE spec, which is not true. In addition, our products have a very
large installed base and compatibility has been proven with virtually
every manufacturer. Since we do no have a Tranzeo unit, we can't verify
at this time.
Alex
sB Tech Support
[EMAIL PROTECTED]
-----Original Message-----
From: Michael Saathoff [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 05, 2003 2:01 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] SB/Tranzeo
I've been trying to use Tranzeo TR-CPE with SB AP's. The TR-CPE's lock
up
consistently. I've been told by Tranzeo that it's a SB issue with the
following explanation:
The issue appears to be in the Sleep Mode of the AP, or rather the lack
of a
sleep mode handling routine. Prism and Agere chipsets send wakeup
frames to
clients, and Atmels do not unless the firmware has code added. The
TR-CPE
has been told that it is disassociated, but the SB thinks it is still
associated. THe TR-CPE sends reassociation beacons, which the SB
ignores
because it thinks the radio is still associated.
I SB hasn't made any comment other than "Were looking into it" and that
was
on 8-27.
Good luck,
Mike
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mickey
Sent: Thursday, September 04, 2003 10:27 AM
To: [EMAIL PROTECTED]
Subject: [smartBridges] SB/Tranzeo
Anyone using Tranzeo and SB together? do they play well together? do
they
(Tranzeo) work well ingeneral?
Thanks,
Mickey
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
