Tranzeo Tech support trying to imply that our product does not meet the
IEEE spec, which is not true. In addition, our products have a very
large installed base and compatibility has been proven with virtually
every manufacturer. Since we do no have a Tranzeo unit, we can't verify
at this time.

Alex
sB Tech Support
[EMAIL PROTECTED] 
 

-----Original Message-----
From: Michael Saathoff [mailto:[EMAIL PROTECTED] 
Sent: Friday, September 05, 2003 2:01 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] SB/Tranzeo

I've been trying to use Tranzeo TR-CPE with SB AP's.  The TR-CPE's lock
up
consistently.  I've been told by Tranzeo that it's a SB issue with the
following explanation:


The issue appears to be in the Sleep Mode of the AP, or rather the lack
of a
sleep mode handling routine.  Prism and Agere chipsets send wakeup
frames to
clients, and Atmels do not unless the firmware has code added.  The
TR-CPE
has been told that it is disassociated, but the SB thinks it is still
associated.  THe TR-CPE sends reassociation beacons, which the SB
ignores
because it thinks the radio is still associated.

I SB hasn't made any comment other than "Were looking into it" and that
was
on 8-27.

Good luck,

Mike





-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mickey
Sent: Thursday, September 04, 2003 10:27 AM
To: [EMAIL PROTECTED]
Subject: [smartBridges] SB/Tranzeo


Anyone using Tranzeo and SB together? do they play well together? do
they
(Tranzeo) work well ingeneral?

Thanks,
Mickey

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to