Thank you for the info EJe.  Looks like it is going to be the APPO being my 
best shot.
-- 
Rudolph Worrell
President
Phone:(540)664-3950
Fax:(270)458-6431
www.wave2net.com


Quoting Eje Gustafsson <[EMAIL PROTECTED]>:

> RW> I am debating using a mixture of APPO when I need it and Airpoint or
> Airpoint
> RW> Pro indoor.
> 
> Just a FYI sB have discontinued the AirPoint Pro Indoor units. I don't
> know if they still will be doing the AirPoint.
> If memory serves me right the Airpoint's don't offer the client bridge
> mode (but then I only played with one of those units onces and that was
> many
> moons ago).
> 
> RW> I am affraid though that they will not interact if I were to do client
> bridge, 
> RW> repeater or any other combinations.
> 
> The airPoint Pro indoor and the outdoor interacted just fine in any
> setup you put on them (client bridge, repeater or any other possible
> combination). But you no longer have that as option since they
> discontinued the aPPI.
> 
> RW> Oh for you GPS guys!  Its all good as long as we have a method of finding
> HOME.
> 
> RW> I myself use a laptop and an airbridge indoor USB.  Yes at 200 + Feet 
> RW> sometimes!  I just purchased a GPS to tell me where the hell I am when I
> am out 
> RW> on a site survey to be able to alteast know the general directions when I
> need 
> RW> to check a signal.  I use all directionals at the client site.
> 
> I use a USB GPS to my laptop and get the bearing to my tower then I
> use my trusty old compass to get the correct heading (direction to aim
> the CPE) then I use a standard CPE unit and aim and most my CPE units
> have a serial configuration port so I use my Ipaq with a serial cable
> and a terminal program to read the signal quality.
> 
> - Eje
> 
> -- 
> [This E-mail scanned for viruses by Declude Virus]
> 
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org  
> 


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to