I plan to limit the bandwidth to 512K for each client - how many client do you think I 
oculd support with this kind of setup.

Rob

Original Message -----------------------

When the APPO is in access point mode, it can handle about 50 clients
without any performance problem (Max. 128). If you have only 2 MB
bandwidth and then you want to add 3 more repeaters means the effective
throughput will cut in half once for each hop away from the parent
Access Point. 

Seeni
sB Tech Support
[EMAIL PROTECTED]


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Monday, September 08, 2003 5:52 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] Bridging Question

I plan to have a central APPO where my 2Mb bandwidth comes in - I will
then have say 3 APPO's acting as repeaters to extend the range

I have been told that an APPO can handle about 50 clients

My Question is - in my setup will I be able to handle 3 x 50 clients or
is the central APPO going to limit me to a max 50 clients in total?

Thanks

Rob

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to