You should be able to see both WB1 & WB2. Do you able to ping from your laptop? If not, please power cycle both WB1 & WB2. The problem could be the Mac caching issue and the reason could be because of using the same laptop to configure both the devices.
Alex sB Tech Support [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Watkins Sent: Thursday, September 25, 2003 3:06 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] More Wireless Bridge Questions When in WB mode, I can only see WB1 in simpleNMS from my laptop - is this normal or should I be able to see both WB1 and WB2? My topology is as follows: Web server <--> WB1(APPO) --------- WB2(APPT) <--> Hub <--> Laptop <--> cable link ---- wireless link ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
