Re: [smartBridges] Single Defer Packets what are they good or bad??

Mon, 29 Sep 2003 17:16:11 -0700

Here is the unit I purchased do you think this bad boy will do the trick? I will have to put it in a box all its own! if they make one big enough!
 
----- Original Message -----
Sent: Monday, September 29, 2003 5:04 PM
Subject: RE: [smartBridges] Single Defer Packets what are they good or bad??

It's my suspicion that this is the exact cause of
the slowdowns. If you have a $200+ switch that can
actually force a port to 10Mbit half duplex and the
rest of the gear you are talking to is faster, that
switch might just have enough buffer in it to prevent
severe packet deferment. But if you are using the
lesser expensive switches or hubs that detect the SB
gear at 10Mbit full duplex, then when the port tries
to talk to the SB gear in both directions at once you
end up with deferred packets.
 
Kevin Summers
KISTech Internet Services Inc.
www.kistech.com

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Blazen Wireless
Sent: Monday, September 29, 2003 4:36 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] Single Defer Packets what are they good or bad??

I am seeing about 8000 on them right now on my main APPO's when reading the description it is vague but does not sound good does this giving any indication that the LAN setting on the switch is not set to 10 Meg 1/2 duplex?
 
Thanks
 
 

Reply via email to