Why are you trying to reinvent the wheel?!?!? Many of us have worked long and hard to get MRTG working (for monitoring many things). Why do you want to use PRTG? Before you ask...look at the smartbridges website and find the MRTG info there. Sully -----Original Message----- From: Steve Good [mailto:[EMAIL PROTECTED] On Behalf Of Steve Good Sent: Tuesday, September 30, 2003 8:29 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's I found the MIB file. I am new at this part of things so I am not completely sure what I am looking for. I did find in the MIB the OID's I am asuming below is one I found. 1.3.6.1.4.1.410.1.1.7.1 But when I enter it in the program it gives me "test failed" This program has a free version it would be great if someome tried to install (see below for link) it and see if they get the same results. I am new to SNMP and monitoring of these so i was looking or a GUI program to make things easier. The program connects to the device and returns Connected to "" Name: Contact: Location: How can I populate these fields? Thanks, Steve Good _____
From: [EMAIL PROTECTED] on behalf of The Wirefree Network Sent: Tue 9/30/2003 9:13 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's Did you look on the simpleMonitor CD itself? Sully -----Original Message----- From: Steve Good [mailto:[EMAIL PROTECTED] On Behalf Of Steve Good Sent: Tuesday, September 30, 2003 7:28 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's I have looked thru the MIB but I do not see where it lists each OID that the radio's use. Am I missing something. What this program requests is: oid Unit Max Type: Gauge Delta Thanks, Steve _____ From: Brendan O'Bra [mailto:[EMAIL PROTECTED] Sent: Tue 9/30/2003 8:16 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] SmartBridges OID's The MIB installs with SimpleMonitor ----- Original Message ----- From: "Steve Good" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 30, 2003 7:07 AM Subject: [smartBridges] SmartBridges OID's I am trying to get this program to work- PRTG by Paessler www.paessler.com I need to find out what the OID's that SB uses on the radios. also how can I populate the fields in the SNMP info of the radio, Name, location and contact all show empty. Any help would be great. Thanks, Steve Good ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
<<attachment: winmail.dat>>
