I am all about diversification...more power to everyone. I am not attacking, just didn't know if you were aware of the capabilities that already exist in FREEEE MRTG. I actually didn't know that PRTG had a GUI interface though. Hope you get it worked out. Sully -----Original Message----- From: Steve Good [mailto:[EMAIL PROTECTED] On Behalf Of Steve Good Sent: Tuesday, September 30, 2003 9:00 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's Why was I not surprised to receive a response of the such. It is not a mater of wanting to reinvent the wheel, this is like the ongoing debate of Ford or Chevy, Windows or Mac, Coke or Pepsi. We all have different likes and dislikes, I simply use PRTG because of the simplicity of it. For someone who is new to this simplicity is better. I have used MRTG before and TRIED to use it with SB products. I had no success at all getting it to work with the SB products (yes I read the instructions). I thought I would go and try the GUI of PRTG and see if it would work for me. I also have a few other people that I would need to access this and they are not the most computer savvy people so I am trying to keep things simple. I have exhausted myself looking at the SB website and the MRTG info there. It has been of no help to find the OID's. The MRTG is not well documented on how to get up and running with ease. If your not familiar with SNMP or MRTG it can be cumbersome to get to work. I send my praise to all who have been involved with getting MRTG working with SB radios keep up the good work, unfourntently the sad fact remains that not everyone is at the same level or has the same taste. I feel it is only fair that one gets to ask questions freely with out being attacked because I prefer to drive a Ford instead of a Chevy. Thanks, Steve Good _____
From: [EMAIL PROTECTED] on behalf of The Wirefree Network Sent: Tue 9/30/2003 9:40 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's Why are you trying to reinvent the wheel?!?!? Many of us have worked long and hard to get MRTG working (for monitoring many things). Why do you want to use PRTG? Before you ask.look at the smartbridges website and find the MRTG info there. Sully -----Original Message----- From: Steve Good [mailto:[EMAIL PROTECTED] On Behalf Of Steve Good Sent: Tuesday, September 30, 2003 8:29 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's I found the MIB file. I am new at this part of things so I am not completely sure what I am looking for. I did find in the MIB the OID's I am asuming below is one I found. 1.3.6.1.4.1.410.1.1.7.1 But when I enter it in the program it gives me "test failed" This program has a free version it would be great if someome tried to install (see below for link) it and see if they get the same results. I am new to SNMP and monitoring of these so i was looking or a GUI program to make things easier. The program connects to the device and returns Connected to "" Name: Contact: Location: How can I populate these fields? Thanks, Steve Good _____ From: [EMAIL PROTECTED] on behalf of The Wirefree Network Sent: Tue 9/30/2003 9:13 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's Did you look on the simpleMonitor CD itself? Sully -----Original Message----- From: Steve Good [mailto:[EMAIL PROTECTED] On Behalf Of Steve Good Sent: Tuesday, September 30, 2003 7:28 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SmartBridges OID's I have looked thru the MIB but I do not see where it lists each OID that the radio's use. Am I missing something. What this program requests is: oid Unit Max Type: Gauge Delta Thanks, Steve _____ From: Brendan O'Bra [mailto:[EMAIL PROTECTED] Sent: Tue 9/30/2003 8:16 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] SmartBridges OID's The MIB installs with SimpleMonitor ----- Original Message ----- From: "Steve Good" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 30, 2003 7:07 AM Subject: [smartBridges] SmartBridges OID's I am trying to get this program to work- PRTG by Paessler www.paessler.com I need to find out what the OID's that SB uses on the radios. also how can I populate the fields in the SNMP info of the radio, Name, location and contact all show empty. Any help would be great. Thanks, Steve Good ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
<<attachment: winmail.dat>>
