RE: [smartBridges] APPO Lock out

[Pascal Losier]

Title: Message

Are you in town or in the wood.   I use 12db omni but I'm in the middle of nowhere.   I'm suppose to get a 250mw AGC amp. Hop it doesn't start making funny things.   With a 500mw, you are above FCC unless you have a lenght of coax.   But a splitter with the 2 sector will bring you to 35 - 36dbm.   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell Sent: Sunday, October 12, 2003 11:28 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] APPO Lock out You may be right about the Omni hearing everything.  When I switched channels it improved on of my repeaters link and now my APPO Total LQ falls off sharply.   I have  2 190 sectors on the way and I hope they help the situation.   Thanks for the information. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Pascal Losier Sent: Sunday, October 12, 2003 9:16 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] APPO Lock out If you are in a busy environnement.   A 500mw & a omni will hear to much crap.   I would installed another APP to see if you have a bad one.   I run couple APP & they never freeze or nothing.   They are up since 8 month & I never went down . -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell Sent: Sunday, October 12, 2003 5:50 PM To: [EMAIL PROTECTED] Subject: [smartBridges] APPO Lock out Last weekend I got locked out of my head AP after doing a few changes skipping channels and power settings.  I was not aware at that time but today I was trying to find a better channel to support all my links at a good LQ.   I changed my channels and everything was good.  I changed channels again and it was fine too.  I change  power settings to a lower setting and it was fine.  I then changed it back to a high setting, tried to change the channel all in about 1.5 minutes and now me nor my clients can associate with the APPO.  Was I taxing it too much?   Is there such a think as a lockout after too many tries?  Last week it just came back after being down for 36 hours.  I reset it anyways and it is was fine until I made changes.   I also have a 500mW bi-directional amp on it with a 12 dbi Omni.    Any ideas?