RE: [smartBridges] Amps!

[Pascal Losier]

Title: Message

A 1A amplifier is OK for signal loss over cable or P2P I imaging.   I interested trying TT AGC amp, Kevin seems to have good luke with it.   I want to install it on my 12Db omni,   What is your omni & your amp ???   I would try it in CPE mode to see if their is any other access point aroud. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell Sent: Thursday, October 16, 2003 11:23 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Amps! Nope near the darn highway 81 in an urban like setting.  I guess I should really do away with the amp.  I am going to try it on a sector and see if this helps.  Perhaps the directional aspect of the sector will cut out some of the crap. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Pascal Losier Sent: Thursday, October 16, 2003 9:08 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Amps! You are listenning a 35 miles radius all around....... Hope your in the wood. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell Sent: Thursday, October 16, 2003 10:52 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Amps! I have a question for anyone who is using or used an am before.  Do they work well with your SB equipment?   I have a 1 watt amp on an a 12 dBi Omni connected to an APPO.  I wanted to see if it would boost my signal substantially.  Well it did for a few hours and now all my LQ's are jumping from 0% - 90%.  Any clue?   I spoke to the manufacturer and he told me that I must set the SB AP to 10dBm and that is all I can do or else I could fry the amp. Well SB AP only goes down to 11.5dBm.   I think I am getting a lot of noise from that AMP on the receiving side because the the signal strength is great but the LQ sucks.