Has anyone used a passive repeater before? (I may be calling that the
wrong thing....it's where you wire two antennas together with just a piece
of LMR-400 to relay or "bounce" signal around a corner, over a hill, etc.)
I have a customer that has a hill in between him and my AP.
/\
/ \
AP / \ Customer
The distance from the AP to the top of the hill is about one mile, clear
line of site. From the top of the hill to my customer is about .5 miles,
clear line of site. There is no electricity out there, no other customers
to be gained by putting up another AP( or APPO to bridge the signal) so
this is really the only cost-effective way to do it that I can think of.
IO was thinking about two yagis on top ot the hill, one pointing at the AP
and the other at the customer, and then giving the customer a yagi too.
Will this work?
Thanks
Sam
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
