Yes. Same as Canopy. And yes, I installed some that were DOA too.
----- Original Message ----- From: "Dan Petermann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 27, 2003 9:22 AM Subject: Re: [smartBridges] Pins for PoE on AirBridge Outdoor > Motorola 3000 Surge protector. > > Is this the same as what Canopy uses? > > If so, then yes it works. I've got a bunch out in the field and no problems > except for some that were bad from the factory. > > At 08:36 PM 10/25/2003 -0500, you wrote: > >----- Original Message ----- > >From: "Tom Haynes" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, October 25, 2003 1:35 AM > >Subject: RE: [smartBridges] Pins for PoE on AirBridge Outdoor > > > > > > > Looking at the pin side of the rj45 plug (not jack) > > > 1- orange w/ stripe > > > 2- orange > > > 3- green w/ stripe > > > 4- blue > > > 5- blue w/ stripe > > > 6- green > > > 7- brown w/ stripe > > > 8- brown > > > > > > 4 = Remote reset (short to ground for reset) > > > 5 = Gnd > > > 7,8 = Vcc + > > > >This pinout is interesting. Has anyone else used the Motorola 3000 Surge > >protector with smartBridges? The two devices seem to be compatible, but when > >I use a CAT5 tester on the cable running through the Motorola surge > >protector, it indicates that pins 4-5 are shorted together and the 7-8 pins > >are shorted together. > > > >----------ANNOUNCEMENT---------- > >Don't forget to register for WISPCON IV > >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > >The PART-15.ORG smartBridges Discussion List > >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >smartBridges <yournickname> > >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > >smartBridges) > >Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
