I would try to put the radio and antenna somewhere else and run POE to the location (if moving it within 300 ft would help) 30rssi is way to low. Try a bigger antenna maybe.
Jerry ----- Original Message ----- From: "Steve Good" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 29, 2003 10:29 AM Subject: [smartBridges] Quick Help I am going out to a customers location today and going to go up on a man lift to about 40+ feet high to test signal. Last week I got on their roof and was able to get signal at 30 RSSI and 70+ link Quality. I was able to transfer between 100k-380k on speed tests. They have a citrix program that requites (so they say) no less then a 512k connection. They are willing to put up a tower because they rather pay 79.99 vs. 1400+ a month (dedicated line) This location is right next less then 100 yards from a power plant and they do not have a line of sight to the tower but are about 3 miles and just shooting thru the top of some trees. For some reason 500k is about the best I get off the tower so the speed is not my concern here, what is my concern is that they are also shooting thru 2 power transmit lines that are 500KV, will these lines cause problems with the wireless signal? Would it be not recommended to leave them at 30 rssi and 70 LQ if they can maintain a constant signal and never loose connection. I know the RSSI is way way low but the connection seems to work fine. any suggestions. anything I might do to help improve it? Thanks, Steve Good ________________________________ ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
