Order a local loop for this customer that goes back to your POP. Maybe $300 per month. You are fighting too many problems to make it worth the pain......Bobby......Airwave Internet
----- Original Message ----- From: "Jerry Carter" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 29, 2003 9:51 AM Subject: Re: [smartBridges] Quick Help > I would try to put the radio and antenna somewhere else and run POE to the > location (if moving it within 300 ft would help) 30rssi is way to low. Try a > bigger antenna maybe. > > Jerry > ----- Original Message ----- > From: "Steve Good" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, October 29, 2003 10:29 AM > Subject: [smartBridges] Quick Help > > > I am going out to a customers location today and going to go up on a man > lift to about 40+ feet high to test signal. Last week I got on their roof > and was able to get signal at 30 RSSI and 70+ link Quality. I was able to > transfer between 100k-380k on speed tests. They have a citrix program that > requites (so they say) no less then a 512k connection. They are willing to > put up a tower because they rather pay 79.99 vs. 1400+ a month (dedicated > line) This location is right next less then 100 yards from a power plant > and they do not have a line of sight to the tower but are about 3 miles and > just shooting thru the top of some trees. For some reason 500k is about the > best I get off the tower so the speed is not my concern here, what is my > concern is that they are also shooting thru 2 power transmit lines that are > 500KV, will these lines cause problems with the wireless signal? Would it be > not recommended to leave them at 30 rssi and 70 LQ if they can maintain a > constant signal and never loose connection. I know the RSSI is way way low > but the connection seems to work fine. any suggestions. anything I might do > to help improve it? > > > Thanks, > Steve Good > ________________________________ > > > > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
