what version firmware do you have. It sounds like a if it were losing association because it did not see the AP anymore this typical from what I can tell and why the came out with the watchdog timer in the latest firmware to auto reboot the client units....
----- Original Message ----- From: "Rick Kosick" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, November 15, 2003 8:46 PM Subject: [smartBridges] APPO(AP) to APPO(CB) Problem Okay, new problem. I have an APPO in AP mode and an APPO in CB mode. If I power off the APPO(AP) and leave the APPO(CB) running for a while.... then go and repower the APPO(AP) back on, I get associated and there are packets on the wireless going back and forth, but there is no IP connectivity. smartMonitor finds the AP but not the CB. The only way to solve this is to reset the CB. === Rick Kosick StarLinX Internet Service The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
