Without a map or site layout its hard to specify what goes where - e.g. is the AP in the middle or on the perimeter? Can you elaborate with a drawing of the site(s)?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayland Sothcott Sent: Tuesday, November 18, 2003 8:59 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Short distance coverage Hello, I have a job where we are connecting four buildings which are within 40 metres of each other. We need good strong coverage in that area and don't want to have to use external antennas except on the airPoint. What would be a suitable location and antenna type to achive this? I imagine a 12db omni mounted above the roof of the middle building would actually spread the signal too high up out of reach of the ground. Yet an antenna mounted inside the building would have too much brick to go through. What are your experiences? Thanks, Wayland. The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
