Hi, We have been using Smart Bridges product for almost a year now and have been having good results. We currently have 4 APPOs running on for different quadrents with 90� sectors. The most customers on one APPO is 25. We are in a situation where we need to change the configuration and move our clients to 1 APPO. We currently have 50+ customers and 10+ on a waiting list. Will 1 APPO with an Omni antenna handle all 50+ current clients and allow for more clients up to 80?
We run horizontal polarity with low noise in the area. According to our BCU, we usually don't have more than 5 customers on our service at one time. If any of you folks with real world APPO load experience have time to answer, please let us know! Thanks Chris --- Colorado WISP llc. http://www.cowisp.net Bringing high speed internet to rural communities. P.O. Box 55 Wellington, Colorado 80549 970-218-5295 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sB Tech Support Sent: Saturday, July 05, 2003 9:49 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SimpleMonitor I am not sure whether the Bridge name is included in the Beacon frame. Will check with developer if this is possible. Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan @ Wyoming.com Sent: Saturday, July 05, 2003 10:12 PM To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' Subject: Re: [smartBridges] SimpleMonitor Yes that is exactly where I would like to see it. All I have is the MAC and I have to look at my spread sheet to try and figure out who is what MAC. If I had names it would really help me figure out who is having problems or getting interference and such. Thanks Alex..............Dan On Fri, 4 Jul 2003 12:23:01 -0600 (Mountain Daylight Time) "Earl Campbell" <[EMAIL PROTECTED]> wrote: > Under the client info tab before the mac address > Earl > > -------Original Message------- > > From: [EMAIL PROTECTED] > Date: Friday, July 04, 2003 12:38:07 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] SimpleMonitor > > Where you would like the name to be appear at? To see the customer > doing, how is it related? Alex > sB Tech Support > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan @ Wyoming.com > Sent: Saturday, July 05, 2003 1:53 AM > To: '[EMAIL PROTECTED]' > Subject: Re: [smartBridges] SimpleMonitor > > > I would like to be able to see the name in Simple Monitor when > accessing an APPO. Would make looking at the AP much easier to see > what the customers are doing. > > Thanks..........Dan > > > On Sat, 5 Jul 2003 01:07:29 +0800 > "sB Tech Support" <[EMAIL PROTECTED]> wrote: > > Are you referring to simpleNMS? If yes, there is friendly name and > > the device IP on it. For the color, I will put forward your > > suggestion. > > > > > > > > Alex > > sB Tech Support > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Earl Campbell > > Sent: Saturday, July 05, 2003 12:57 AM > > To: '[EMAIL PROTECTED]' > > Subject: RE: [smartBridges] SimpleMonitor > > > > > > > > SB, > > Could you put the friendly name of the client or ap in front of the > >MAC address? It's a pain to cross reff the mac to a name. Also for > >units that are down, could you change the color of the diamond to > >yellow so it > > shows up better ? > > Earl - UpHi.net > > > > > > > > ____________________________________________________ > > <http://www.incredimail.com/redir.asp?ad_id=309&lang=9> > > IncrediMail - > > Email has finally evolved - > > <http://www.incredimail.com/redir.asp?ad_id=309&lang=9> Click Here > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > . The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
