found on smartmontools-support.
smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD2500AB-00DYA0
Serial Number: WD-WMAEH1676221
Firmware Version: 15.05R15
User Capacity: 250,059,350,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 11 13:38:27 2004 GMT Standard Time
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command
from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (7590) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 152 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 127 123 021 Pre-fail Always
- 4191
4 Start_Stop_Count 0x0032 100 100 040 Old_age Always
- 50
5 Reallocated_Sector_Ct 0x0033 193 193 140 Pre-fail Always
- 111
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always
- 6794
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 50
194 Temperature_Celsius 0x0022 115 253 000 Old_age Always
- 35
196 Reallocated_Event_Count 0x0032 141 141 000 Old_age Always
- 59
197 Current_Pending_Sector 0x0012 176 176 000 Old_age Always
- 996
198 Offline_Uncorrectable 0x0012 197 161 000 Old_age Always
- 139
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0009 145 155 051 Pre-fail Offline
- 1843
SMART Error Log Version: 1
ATA Error Count: 101 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 101 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours)
When the command that caused the error occurred, the device was doing SMART
Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 03 9d 12 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 08 00 00 44d+06:27:36.700 NOP [Abort queued commands]
1c 00 12 00 00 0b 9d 00 44d+06:27:36.700 RECALIBRATE [RET-4]
00 00 e7 00 00 00 00 00 44d+06:27:36.700 NOP [Abort queued commands]
00 00 26 00 00 59 34 00 44d+06:27:36.700 NOP [Abort queued commands]
00 00 25 00 00 03 00 00 44d+06:27:36.700 NOP [Abort queued commands]
Error 100 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours)
When the command that caused the error occurred, the device was doing SMART
Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 03 9d 12 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 08 00 00 44d+06:27:34.800 NOP [Abort queued commands]
00 00 e7 00 00 00 00 00 44d+06:27:34.800 NOP [Abort queued commands]
00 00 26 00 00 59 34 00 44d+06:27:34.800 NOP [Abort queued commands]
00 00 25 00 00 03 00 00 44d+06:27:34.800 NOP [Abort queued commands]
1c 00 12 00 00 03 9d 00 44d+06:27:34.800 RECALIBRATE [RET-4]
Error 99 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours)
When the command that caused the error occurred, the device was doing SMART
Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 28 03 9d 12 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 28 00 00 44d+06:27:27.000 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 44d+06:27:27.000 NOP [Abort queued commands]
00 00 e7 00 00 00 00 00 44d+06:27:27.000 NOP [Abort queued commands]
00 00 65 00 00 93 a9 00 44d+06:27:27.000 NOP [Abort queued commands]
00 00 25 00 00 2b 00 00 44d+06:27:27.000 NOP [Abort queued commands]
Error 98 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours)
When the command that caused the error occurred, the device was doing SMART
Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 28 03 9d 12 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 28 00 00 44d+06:27:25.050 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands]
00 00 e7 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands]
00 00 25 00 00 2b 00 00 44d+06:27:25.050 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands]
Error 97 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours)
When the command that caused the error occurred, the device was doing SMART
Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 2b 03 9d 12 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 2b 00 00 44d+06:27:19.250 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 44d+06:27:19.250 NOP [Abort queued commands]
00 00 e7 00 00 00 00 00 44d+06:27:19.250 NOP [Abort queued commands]
1c 00 12 00 00 00 9d 00 44d+06:27:19.250 RECALIBRATE [RET-4]
00 00 35 00 00 08 00 00 44d+06:27:19.250 NOP [Abort queued commands]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 90% 241
470981891
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
