Pretty new SSD by SK hynix, using their in-house (ex Link_A_Media Devices)
controller.
Great how it starts logging errors immediately... (Note: I hotplugged the
disk into an old-ish Intel 1U rack server).
Regards
Marco
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-1-grml-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HFS256G32MND-3312A
Serial Number: FI56N028510206B4P
Firmware Version: 20001P00
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Aug 17 10:46:55 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 253 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 1
100 Unknown_Attribute -O--CK 100 100 000 - 437766
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 253 000 - 0
174 Unknown_Attribute ----CK 253 100 000 - 0
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
177 Wear_Leveling_Count -O--CK 253 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 37
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 159
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 4129
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 253 253 000 - 0
188 Command_Timeout -O--CK 253 253 000 - 0
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 021 021 000 - 21 (Min/Max 21/22)
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
231 Temperature_Celsius PO--CK 253 253 010 - 0
234 Unknown_Attribute -O--CK 253 100 000 - 0
241 Total_LBAs_Written -O--CK 253 100 000 - 0
242 Total_LBAs_Read -O--CK 253 100 000 - 0
250 Read_Error_Retry_Rate -O--CK 253 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL R/O 8 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 1076 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1076 [15] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 43 00 00 00 00 00 00 00 00 00 00 00:01:23.150 SET FEATURES [Set
Max Host I/F S Times]
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:22.900 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:01:22.660 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:22.410 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:22.170 SET FEATURES [Enable
write cache]
Error 1075 [14] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 45 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:22.900 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:01:22.660 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:22.410 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:22.170 SET FEATURES [Enable
write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:01:21.920 SET FEATURES [Enable
read look-ahead]
Error 1074 [13] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 43 00 00 00 00 00 00 00 00 00 00 00:01:13.790 SET FEATURES [Set
Max Host I/F S Times]
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:13.540 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:01:13.300 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:13.050 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:12.810 SET FEATURES [Enable
write cache]
Error 1073 [12] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 45 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:13.540 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:01:13.300 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:13.050 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:12.810 SET FEATURES [Enable
write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:01:12.560 SET FEATURES [Enable
read look-ahead]
Error 1072 [11] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 43 00 00 00 00 00 00 00 00 00 00 00:01:00.350 SET FEATURES [Set
Max Host I/F S Times]
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:00.100 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:00:59.860 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:00:59.610 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:59.370 SET FEATURES [Enable
write cache]
Error 1071 [10] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 45 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 42 00 45 00 00 00 00 00 00 00 00 00:01:00.100 SET FEATURES [Enable
AAM] [OBS-ACS-2]
ef 00 05 00 fe 00 00 00 00 00 00 00 00 00:00:59.860 SET FEATURES [Enable
APM]
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:00:59.610 SET FEATURES [Enable
SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:59.370 SET FEATURES [Enable
write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:00:59.120 SET FEATURES [Enable
read look-ahead]
Error 1070 [9] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
80 00 01 00 21 00 00 00 00 00 00 40 40 00:00:55.640 [VENDOR SPECIFIC]
80 00 00 00 01 00 00 00 00 00 00 40 40 00:00:55.400 [VENDOR SPECIFIC]
80 00 01 00 01 00 00 00 00 00 00 40 40 00:00:55.150 [VENDOR SPECIFIC]
80 00 00 00 01 00 00 00 00 00 00 40 40 00:00:54.910 [VENDOR SPECIFIC]
80 00 01 00 01 00 00 00 00 00 00 40 40 00:00:53.660 [VENDOR SPECIFIC]
Error 1069 [8] occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
80 00 01 00 21 00 00 00 00 00 00 40 40 00:00:55.640 [VENDOR SPECIFIC]
80 00 00 00 01 00 00 00 00 00 00 40 40 00:00:55.400 [VENDOR SPECIFIC]
80 00 01 00 01 00 00 00 00 00 00 40 40 00:00:55.150 [VENDOR SPECIFIC]
80 00 00 00 01 00 00 00 00 00 00 40 40 00:00:54.910 [VENDOR SPECIFIC]
80 00 01 00 01 00 00 00 00 00 00 40 40 00:00:53.660 [VENDOR SPECIFIC]
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (empty) ==
4 ===== = = == General Errors Statistics (empty) ==
5 ===== = = == Temperature Statistics (empty) ==
6 ===== = = == Transport Statistics (empty) ==
7 ===== = = == Solid State Device Statistics (empty) ==
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
