I’ve installed SmartOS on a new server, and I regularly get kernel panics. The last couple of times that this happened it seems to boot up fine after it restarted from the panic, but when I'd restart again it’d give me a panic again. I haven’t tested it enough to see whether this is a consistent pattern. Interestingly enough, another server that I have with fairly similar specs does not run into this issue. The only differences between the two that I’m aware of is that the crashing server has a newer/faster CPU and slightly different set of hard drives. It’s got the same motherboard and disk controller).
Here is some output from running mdb on the crash dump: > ::status debugging crash dump vmcore.2 (64-bit) from operating system: 5.11 joyent_20140307T223339Z (i86pc) image uuid: (not set) panic message: BAD TRAP: type=e (#pf Page fault) rp=ffffff0040aff0a0 addr=7fbd11e10 occurred in module "apix" due to an illegal access to a user address dump content: kernel pages only > ::stack apix_intx_enable+0x42(12) apix_enable_vector+0x125(ffffff090eed3800) apix_setup_io_intr+0x58(ffffff090eed3800) apix_addspl+0x6b(80000920, 5, 0, 0) apix_add_avintr+0x136(ffffff090eda9d40, 5, fffffffff7efaf60, ffffff09067484e8, 80000920, ffffff090edc2200) add_avintr+0x7d(ffffff090eda9d40, 5, fffffffff7efaf60, ffffff09067484e8, 80000920, ffffff090edc2200) pci_enable_intr+0xb7(ffffff0906749800, ffffff0906833010, ffffff090eda9d40, 0) pci_common_intr_ops+0x20e(ffffff0906749800, ffffff0906833010, 8, ffffff090eda9d40, 0) npe_intr_ops+0x21(ffffff0906749800, ffffff0906833010, 8, ffffff090eda9d40, 0) pciide_intr_ops+0x18c(ffffff0906833010, ffffff0906831aa0, 8, ffffff090eda9d40, 0) i_ddi_intr_ops+0x4e(ffffff0906831aa0, ffffff0906831aa0, 8, ffffff090eda9d40, 0) ddi_intr_enable+0x57(ffffff090eda9d40) ddi_add_intr+0xca(ffffff0906831aa0, 0, ffffff090edc2358, 0, fffffffff7efaf60, ffffff090edc2200) ghd_register+0x178(fffffffff7f024b3, ffffff090edc2318, ffffff0906831aa0, 0, ffffff090edc2200, fffffffff7f006e0) ata_init_controller+0x31b(ffffff0906831aa0) ata_attach+0x34(ffffff0906831aa0, 0) devi_attach+0x92(ffffff0906831aa0, 0) attach_node+0xa7(ffffff0906831aa0) i_ndi_config_node+0x86(ffffff0906831aa0, 6, 0) i_ddi_attachchild+0x48(ffffff0906831aa0) devi_attach_node+0x5e(ffffff0906831aa0, 4004048) config_immediate_children+0xbf(ffffff0906833010, 4004048, ffffffff) devi_config_common+0xd9(ffffff0906833010, 4004048, ffffffff) mt_config_thread+0x58(ffffff0913062c40) thread_start+8() Please let me know what I should do to further diagnose (or work around) this issue. Thanks, Alex ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
