On 21.05.2014, at 00:00, Nicholas Lee <[email protected]> wrote: > On Wed, May 21, 2014 at 8:49 AM, MacLemon via smartos-discuss > <[email protected]> wrote: >> Hello! >> >> I'd like to get SmartOS running on this embedded board from PCEngines called >> APU1C. >> If you don't know the hardware, here are the specs: >> http://pcengines.ch/apu1c.htm >> From my understanding it meets the SmartOS hardware requirements. (I use the >> 4GB RAM variant.) > > I can't speak to your other issues, but without EPT you will only be able to > run joyent zones and not KVM. That is fine for me.
> Have you tried one of the others like OmniOS as a test? I tried, OmniOS doesn't even get beyond the bootloader. On 23.05.2014, at 12:39, Alessio <[email protected]> wrote: > related to USB 3s The board doesn't have USB 3.0 but only USB 2.0. (Link to specs in quote above) >From a little kernel debugging yesternight I'm not sure that the EHCI module >actually is the culprit. It might as well be the kernel module loaded after >that. Thanks to wesolows in ##smartos for helping me with kmdb! Is anyone else (besides wiedi and drscream) trying to get this board working with SmartOS? Best regards MacLemon ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
