AW: [smartos-discuss] Need help in bringing up network inside a zone in SmartOS

Sun, 25 May 2014 07:55:18 -0700

‎Ganapathy,

I don't know the exact syntax off my head but a Google search for "vmadm update resolvers" should get you there.

Peter

Von: Ganapathy S A via smartos-discuss
Gesendet: Sonntag, 25. Mai 2014 15:43
An: [email protected]; Peter Kelm
Antwort an: [email protected]
Cc: Daniel Malon; Yu Li
Betreff: Re: [smartos-discuss] Need help in bringing up network inside a zone in SmartOS

Peter,

Thanks a lot, you saved my life! the /etc/resolv.conf has no entry inside the zone. Just edited it with the content of GZ and it worked! Would you mind pointing out how to add an entry in the json file for resolver?

​PS: Thanks to all who've helped me in resolving the issue :-)​


Regards,
Ganapathy


On 25 May 2014 17:31, Peter Kelm via smartos-discuss <[email protected]> wrote:
‎Ganapathy,

Sorry if this has been discussed already: Does network access in the Global Zone work?‎ If it does I would expect that the issue is with the local Zone config. In the zone json you copied in one of your previous messages you did not provide a gateway and resolver entry...

Just my 2ct,

Peter

Von: Ganapathy S A via smartos-discuss
Gesendet: Sonntag, 25. Mai 2014 11:39
An: Daniel Malon
Antwort an: [email protected]
Betreff: Re: [smartos-discuss] Need help in bringing up network inside a zone in SmartOS

NIC in VBox is set to bridging interface and promise mode set to 'Allow All'. And the logged in user has write access to /dev/net/net0 But still the zone can't reach the outer world
On 25 May 2014 12:41, "Daniel Malon" <[email protected]> wrote:
Hi,


If you have set the NIC in VirtualBox to a bridging interface and allow promise mode you should be all set up.
Some people tho have problems with VirtualBox where the GZ gets network connected but every created zone can’t reach the outer world.

Check if your logged in user has write access to the VirtualBox network device in /dev as well.

—
Daniel

On 25 May 2014, at 08:05, Ganapathy S A via smartos-discuss <[email protected]> wrote:

Hi Yu,

Thanks for the reply. Did as you said, but no help! Also, only the delete-bridge effect is persistent across reboots but not create-bridge! How to make the create-bridge effect persistent across reboots?

Regards,
Ganapathy


On 25 May 2014 06:34, Yu Li <[email protected]> wrote:
Hi, Ganapathy​

If you are in a zone, and with VirtualBox, you may need to do some tweak as default SmartOS only setup for VMware.

Some info here:http://wiki.smartos.org/display/DOC/How+to+create+a+Virtual+Machine+in+SmartOS

Quick steps:

delete the vmwarebr first

dladm remove-bridge -l e1000g0 vmwarebr
dladm delete-bridege vmwarebr

then create a vboxbr and link to the main nic

dladm create-bridge -l e1000g0 vboxbr

hope help :)


On Sun, May 25, 2014 at 4:08 AM, Ganapathy S A via smartos-discuss <[email protected]> wrote:
​​
I am a newbie SmartOS (Unix) user! Trying to setup a zone for web app development in SmartOS
 ​ (running inside VBox with host as Ubuntu​
​)​
. Followed the instructions in this page and successfully created a zone & able to login as well. But network is down inside the zone & hencepkgin up fail
 ​s! Output of dladm show-phys, dladm show-link, and json content has been attached (smartos-snap-gz). Output of dladm show-phys,dladm show-link inside the zone also has been attached (smartos-snap-nongz). What configuration did I miss? Any help is much appreciated. 

P.S: I am not sure if this is the right place to seek this kind of help, if not kindly guide me in the right direction.

​Thanks & ​
Regards,
Ganapathy
​ S Avathan​
smartos-discuss | Archives  | Modify Your Subscription


smartos-discuss | Archives  | Modify Your Subscription

smartos-discuss | Archives | Modify Your Subscription

smartos-discuss | Archives | Modify Your Subscription

smartos-discuss | Archives | Modify Your Subscription

smartos-discuss | Archives | Modify Your Subscription

Reply via email to